English
Language : 

U6209B Datasheet, PDF (2/11 Pages) TEMIC Semiconductors – 1.3 GHz PLL for TV- and VCR- Tuner
U6209B
Pin Configuration
PD 1
Q1 2
Q2 3
SDA 4
SCL 5
P3 6
P2 7
P1 8
16 VD
15 GND
14 RFi
13 RFi
12 VS
11 P4
10 AS
9 P0
95 10758
Figure 2.
Pin Symbol
Function
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 1
PD Charge pump output
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 2
Q1 Crystal
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 3
Q2 Crystal
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 4
SDA Data in/output
5
SCL Clock
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 6
P3 Port output (open collector)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 7
P2 Port output (open collector)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 8
P1 Port output (open collector)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 9
P0 Port output (open collector)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 10
AS Address select input
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 11
P4 Port output (open collector)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 12
Vs Supply voltage
13
RFi RF input
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 14
RFi RF input
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 15
GND Ground
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 16
VD Active filter output
Circuit Description
The U6209B is a single-chip PLL designed for TV and
VCR receiver systems. It consists of a bridgeable
divide-by-8 prescaler with an integrated preamplifier, a
15-bit programmable divider, a crystal oscillator and a
reference divider with two selectable divider ratios
(512 / 1024), and a phase/frequency detector together
with a charge pump which drives the tuning amplifier.
Only one external transistor is required for varactor-line
driving. The device can be controlled via I2C bus format.
There are four programmable addresses selectable,
programmed by applying a specific input voltage to the
address-select input, enabling the use of up to four
synthesizers in a system. Five open collector output port
functions are included which are capable of sinking at
least 10 mA.
Oscillator frequency calculation:
fvco = PSF x SF x frefosc / 1024
fvco: Locked frequency of voltage controlled oscillator
PSF : Scaling factor of prescaler (1 or 8)
SF : Scaling factor of programmable 15-bit divider
frefosc :Reference oscillator frequency:
3.2/4 MHz crystal or external reference frequency
In addition, there are port outputs available for band-
switching and other purposes.
Application
A typical application is shown on page 10. All input /
output interface circuits are shown on page 9.
Some special features which are related to test- and
alignment procedures for tuner production are explained
together within the following I2C bus mode description.
2 (11)
TELEFUNKEN Semiconductors
Preliminary Information
Rev. A2, 30-Aug-96