U2795B Datasheet, PDF (2/13 Pages) TEMIC Semiconductors – 2.5-GHz Double Balanced Mixer

U2795B
Pin Description
V_S ¹
RF_I ²
P3
S_O 4
8 ^PD
7 _LOi
6 GND
5 IF_O
94 7890 e
TELEFUNKEN Semiconductors
Pin Symbol
Function
1
V_S Supply voltage
2
RF_i RF input
3
P Progamming port IP3, CP
4
S_O Output symmetry
5
IF_O IF output
6
GND Ground
7
LO_i LO input
8
PD Power down
Functional Description
Supply Voltage
The IC is designed for a supply voltage of 2.7 to 5.5 V. As
the IC is internally stabilized, the performance of the
circuit is nearly independent of the supply voltage.
Input Impedance
W Input impedance, Z_RFi, is about 700 with an additional
capacitive component. This condition provides the best
noise figure in combination with a matching network.
3. Order Intercept Point (IP3)
Voltage divider, R_P / R_1, determinates both the input and
output intercept point, IIP3 and OIP3. If R_P is infinity the
IIP3 has the maximum of about – 4 dBm.
Current Consumption, I_S
Depending on the chosen input and output conditions of
the IC, the current consumption, I_S, is between 4 mA and
10 mA. The current consumption in dependence of Rp is
shown in figure 4.
Power Down
This feature provides an extension of battery life. If this
function is not used, Pin 8 has to be connected to V_S
(Pin 1).
Output Symmetry
The symmetry of the load current can be matched and so
be optimized for a given load impedance.
The IP3/R_P characteristics are shown in figure 1 and 2.
Output Impedance and Intercept Point
Output impedance is shown in figure 9.
Both low output impedance and a high intercept point are
with reference to a high value of R_P.
2 (13)
Rev. A2: 08.06.1995