|
TDA4471 Datasheet, PDF (10/16 Pages) TEMIC Semiconductors – Multistandard Video-IF and Quasi Parallel Sound Processing | |||
|
◁ |
TDA4471
TELEFUNKEN Semiconductors
Notes:
1. This parameter is given as an application information and not tested during production.
2. Adjustment of turn over point (delayed tuner AGC) with external resistor Rtop or external voltage Vtop.
3. The oscillator drift is related to picture carrier frequency, at external temperature-compensated LC
circuit
4. (1.07) = 20 log (4.43 MHz component/1.07 MHz component);
(1.07) value related to blackâwhite signal
input signal conditions: picture carrier 0 dB
colour carrier
â6 dB
sound carrier â24 dB
5. Without external control voltage at Pin 15 (open circuit) the IC automatically operates in mode :
negative modulated video IF and FM/NICAM sound signals
Voltage at Pin 15
(standard switch)
Selected standard
(mode)
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ 0 â 0.8 V
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ mode 2 (L standard)
VIF: pos. modulation
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ SIF: AM + NICAM
2.0V â Vs
(or Pin 15 open)
mode 1 (B/G standard)
VIF: neg. modulation
SIF: FM/ NICAM
6. Without control voltage at Pin 21 (open circuit) the falling AFC curve is automatically selected
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Voltage at Pin 21
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ (AFC switch)
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ AFC function
0 â 0.8 V
AFC switched OFF
1.5 â 2.5 V
AFC curve rising
3.5 V â Vs
(or Pin 21 open)
AFC curve falling
7. Without control voltage at Pin 16 (open circuit) the Lâ switch is not active.
St Package
Mode 1: neg. modulation (B/G)
Mode 2: pos. modulation (L)
(Dimensions in mm) stan-
dard switch, Pin 15
2.0 V â VS
0 â 0.8 V
Lâ/VIF input switch, Pin 16 3.4 V â 4.5 V
0 â 3.1 V
3.4 V â 4.5 V
0 â 3.1 V
(or Pin 16 open)
(or Pin 16 open)
Ext. voltage at VIF input 2, open 1 V open 1 V open 1 V open 1 V
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Pin 10 or 11
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Modulation
neg. neg. neg.
*)
neg. neg. neg. neg.
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Standard
B/G,... B/G,... B/G,... *)
L
L
Lâ
Lâ
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Active VIF input
VIF1 VIF1 VIF2
*)
VIF2 VIF1 VIF2 VIF1
*) condition not useful
8. Picture carrier PC = 38.9 MHz; sound carrier SC1 = 33.4 MHz, SC2 = 33.16 MHz;
PC/SC1 =13 dB; PC/SC2 = 20 dB; PC unmodulated (equivalent to sync peak level)
9. Sound carrier SC = 32.4 MHz, modulated with fmod = 1 kHz, m = 54 %; vin = 10 mV
10 (16)
Preliminary Information
Rev. A1: 18.08.1995
|
▷ |