|
TSC51C1 Datasheet, PDF (1/31 Pages) TEMIC Semiconductors – 8-Bit Microcontroller for Digital Computer Monitors | |||
|
TSC8051C1
8-Bit Microcontroller for Digital Computer Monitors
1. Introduction
The TSC8051C1 is a standâalone high performance In addition, the TSC8051C1 has 2 software selectable
CMOS 8âbit embedded microcontroller and is designed modes of reduced activity for further reduction in power
for use in CRT monitors. It is also suitable for automotive consumption. In the idle mode the CPU is frozen while
and industrial applications.
the RAM, the timers, the serial ports, and the interrupt
The TSC8051C1 includes the fully static 8âbit â80C51â
CPU core with 256 bytes of RAM; 8 Kbytes of ROM; two
system continue to function. In the power down mode the
RAM is saved and all other functions are inoperative.
16âbit timers; 12 PWM Channels; a 6 sources and 2âlevel The TSC8051C1 enables the users reducing a lot of
interrupt controller; a full duplex serial port; a full I2Câ¢* external discrete components while bringing the
interface; a watchdog timer and onâchip oscillator.
maximum of flexibility.
2. Features
D Boolean processor
D Fully static design
D 8K bytes of ROM
D 256 bytes of RAM
D 2 x 16âbit timer/counter
D Programmable serial port
D Programmable Multimaster I2C controller
D 6 interrupt sources:
G External interrupts (2)
G Timers interrupt (2)
G Serial port interrupt
G I2C interrupt
D Watchdog reset
D On chip oscillator for crystal or ceramic resonator
D 2 power saving control modes:
G Idle mode
G Powerâdown mode
D Controlled HSYNC & VSYNC outputs
D Up to 12 programmable PWM channels with 8âbit
resolution
D Up to 32 programmable I/O lines depending on the
package
D 40 pins DIP, 44 pins PQFP, 44 and 52 pins PLCC
packages
D Commercial and industrial temperature ranges
D Operating Frequency: 12 MHz to 16 MHz
* I2C is a trademark of PHILIPS Corporation
MATRA MHS
1
Rev. D (14 Jan. 97)
|
▷ |