RV1490M Datasheet, PDF (3/10 Pages) TEMEX – High Performance non-PLL Voltage Control Crystal Oscillator

Rakon Product Proposal
8.0
Line
8.1
8.2
8.3
8.4
8.5
-----
9.0
Line
9.1
9.2
9.3
9.4
9.5
-----
10.0
Line
10.1
10.2
10.3
10.4
10.5
10.6
10.7
-----
11.0
Line
11.1
11.2
-----
SSB PHASE NOISE
Parameter
SSB Phase Noise
power density @ 10
Hz offset
SSB Phase Noise
power density @ 100
Hz offset
SSB Phase Noise
power density @ 1
KHz offset
SSB Phase Noise
power density @ 10
KHz offset
SSB Phase Noise
power density @ 100
KHz offset
Test Condition
Value for a 77.76 MHz VCXO @ 25°C
Value for a 77.76 MHz VCXO @ 25°C
Value for a 77.76 MHz VCXO @ 25°C
Value for a 77.76 MHz VCXO @ 25°C
Value for a 77.76 MHz VCXO @ 25°C
Value
-65
-90
-115
-137
-145
Unit
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
SSB PHASE NOISE
Parameter
SSB Phase Noise
power density @ 10
Hz offset
SSB Phase Noise
power density @ 100
Hz offset
SSB Phase Noise
power density @ 1
KHz offset
SSB Phase Noise
power density @ 10
KHz offset
SSB Phase Noise
power density @ 100
KHz offset
Test Condition
Value for a 155.52 MHz VCXO @ 25°C
Value for a 155.52 MHz VCXO @ 25°C
Value for a 155.52 MHz VCXO @ 25°C
Value for a 155.52 MHz VCXO @ 25°C
Value for a 155.52 MHz VCXO @ 25°C
Value
-58
-80
-113
-135
-140
Unit
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ENVIRONMENTAL SPECIFICATION
Parameter
Description
SMD
Product suitable for Pb-free convection reflow soldering, compliant with JEDEC standard. J-
STD-020, Level 1.
Storage Temperature
range
-55 to 125 °C
Sealing
Non-hermetic package
Shock
981ms-² (100gn) acceleration for 6ms duration, 3 shocks in each direction along 3 mutually
perpendicular axis. IEC 60068-2-27 Test Ea
Vibration
10-60Hz 0.75mm displacements, 60-500Hz 98.1ms-² (10gn) acceleration. 30 minutes in each
of three mutually perpendicular planes at 1 octave per minute. IEC 60068-2-6 Test Fc
Procedure B4
Marking
Resistant to all common solvents
RoHS
Parts are fully compliant with the European Union Directive 2002/95/EC on the restriction of
the use of certain hazardous substances in electrical and electronic equipment. Note: The
RoHS compliant parts are suitable for assembly using both Lead-free solders and Tin/Lead
solders.
MANUFACTURING INFORMATION
Parameter
Description
Packaging Description Tape and Reel as shown
Reflow
Solder reflow process as per attached profile
Page 3