CFPT9300 Datasheet, PDF (3/9 Pages) TEMEX – SMD Temperature Compensated Crystal Oscillator

9.0
Line
9.1
9.2
9.3
9.4
9.5
9.6
-----
10.0
Line
10.1
10.2
10.3
10.4
10.5
10.6
-----
11.0
Line
11.1
11.2
11.3
-----
12.0
Line
12.1
12.2
12.3
12.4
-----
13.0
Line
13.1
13.2
13.3
-----
14.0
Line
14.1
14.2
OSCILLATOR OUTPUT-HCMOS
Parameter
Test Condition
Output waveform
HCMOS. Refer to note 2 re ACMOS
Output voltage level
low
Output voltage level
high
Rise and fall times
Duty cycle
at 50% level
Load
Value
0.1 max
0.9 min
8 max
45 to 55
15
Unit
Vs
Vs
ns
%
pF
PHASE NOISE
Parameter
SSB phase noise
power density at 1Hz
offset
SSB phase noise
power density at
10Hz offset
SSB phase noise
power density at
100Hz offset
SSB phase noise
power density at 1kHz
offset
SSB phase noise
power density at
10kHz offset
SSB phase noise
power density at
100kHz offset
Test Condition
Typical value for a 14.4MHz oscillator at 25°C
Typical value for a 14.4MHz oscillator at 25°C
Typical value for a 14.4MHz oscillator at 25°C
Typical value for a 14.4MHz oscillator at 25°C
Typical value for a 14.4MHz oscillator at 25°C
Typical value for a 14.4MHz oscillator at 25°C
Value
-70
-95
-115
-135
-140
-145
Unit
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ENVIRONMENTAL
Parameter
Shock
Vibration
Storage temperature
Description
IEC 60068-2-27 test Ea. 1500gn acceleration for 0.5ms duration, half sine pulse, 3 shocks in
each direction along three mutually perpendicular axes at octave per minute
IEC 60068-2-6 test Fc. 10-60Hz 1.5mm displacement, 60-2000Hz at 20gn, 4 hours in each of
three mutually perpendicular axes at 1 octave per minute
-55°C to 125°C
PIN CONNECTIONS
Parameter
Pin 1
Pin 2
Pin 3
Pin 4
Description
Voltage Control (leave unconnected in case the 'no frequency adjust' option has been ordered)
Ground
Output
Supply Voltage, Vs
MARKING
Parameter
Type
Line 1
Line 2
Description
Laser marked
[ R XXX ] Rakon, manufacturing identifier (XXX)
[Δ 0000 YW] Pad 1 / static sensitivity identifier (Δ), abbreviated part number (0000), device
date code (YW)
MANUFACTURING INFORMATION
Parameter
Description
Reflow shift
Solder reflow processes as per profile attached (see reflow profile diagram)
Packaging description Quanities >100 pieces will be supplied on tape and reel
Page 3