RXO7050M Datasheet, PDF (2/9 Pages) TEMEX – SMD Clock Oscillator

4.0
Line
4.1
4.2
4.3
4.4
4.5
-----
5.0
Line
5.1
5.2
5.3
5.4
5.5
-----
6.0
Line
6.1
6.2
6.3
6.4
-----
7.0
Line
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
-----
8.0
Line
8.1
8.2
8.3
8.4
8.5
8.6
-----
9.0
Line
9.1
9.2
9.3
9.4
9.5
9.6
9.7
OUTPUT CHARACTERISTICS - CMOS (UP TO 200 MHz)
Parameter
Test Condition
Output Voltage (Vol)
15pF load
Output Voltage (Voh) 15pF load
Duty Cycle
@ 50% VDD
Rise and Fall Time
90%/10%
RMS Phase Jitter
Typical integrated 12kHz to 20MHz
Value
10 max
90 min
45 to 55
3 max
0.05 to 0.3
OUTPUT CHARACTERISTICS - LVPECL ONLY
Parameter
Test Condition
Output Voltage (Vol)
50Ω nominal load. (VDD - 1.6V) max.
Output Voltage (Voh) 50Ω nominal load. (VDD - 1.03V) min.
Duty Cycle
@ VDD-1.3V
Rise Time/Fall Time
80%/20%
RMS Phase Jitter
Integrated 12kHz to 20MHz
Value
45 to 55
0.6 max
0.05 to 0.3
OUTPUT CHARACTERISTICS - LVDS ONLY
Parameter
Test Condition
Differential Output:
Voltage Swing (Vod)
Duty Cycle
Measured at 1.25V
Rise and Fall Time
RL = 100Ω / CL = 10pF
RMS Phase Jitter
Typical integrated 12kHz to 20MHz
Value
350
45 to 55
0.6 max
0.05 to 0.3
PIN CONNECTIONS
Parameter
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
* Output Enabled
* Output Disabled
Description
E/D* or NC
E/D* or NC
GND
OUTPUT
COMPLIMENTARY OUTPUT (LVPECL/LVDS only) or N/C
VDD
>70% of VDD on E/D, or E/D pin left open (connected to internal pull-up resistor)
<30% of VDD on E/D, or E/D pin to GND
PACKAGE DETAIL
Parameter
Package
Top line
Middle line
Bottom line
* Year code
** WeeK Code
Description
A, B, C, G4, G6, or J6
[R ######] Part identifier
[######] Part information
[o FYWW] Pin 1, Manufacturing code, Year code* and Week code**
A = 2010, B = 2011, C = 2012, D = 2013, ... Z = 2035
WW = 01 = Week of first Monday of the year
ENVIRONEMENTAL SPECIFICATION
Parameter
Description
Mechanical Shock
MIL-STD-883, Method 2002
Storage Temperature
Range
-55 to 125°C
Humidity
After 48 hours at 85°C±2°C 85% relative humidity non-condensing
Thermal Shock
MIL-STD-883, Method 1011
Vibration
MIL-STD-883, Method 2007
Gross and Fine Leak
MIL-STD-883, Method 1014
RoHS Compliant
Yes
Unit
%VDD
%VDD
%
ns
ps
Unit
%
ns
ps
Unit
mV
%
ns
ps
Page 2