English
Language : 

RPT7050P Datasheet, PDF (1/2 Pages) TEMEX – Clipped sine wave and HCMOS output options
PLUTO+ ™ ULTRA STABLE SMD VC‐TCXO | SMALL CELLS
RPT7050P
The Pluto+ RPT7050P encompasses Rakon’s patented Pluto+ ASIC technology and is specifically designed to meet the short and medium term
stability requirements of packet network synchronisation for Small Cells. This‘best‐in‐class’oscillator has low jitter to meet network
interface requirements (e.g. 10GE) and low phase noise to meet the radio interface requirements of LTE‐A (TS 36.104) and WCDMA (TS
25.104) transceivers. This enables a single device to be used for both functions. Its superb frequency versus temperature and slope
performance, together with low power consumption makes the RPT7050P the ideal choice for Small Cell synchronisation requirements.
Features
 Patented ‘varactor linearisation’ removes the
effects of tilt when using voltage control
 Clipped sine wave and HCMOS output options
available
 LTE phase noise compliant
Applications
 Small Cells
o WCDMA
o LTE
o LTE‐A
7.0 x 5.0 x 2.0 mm
Standard Specifications
Parameter
Nominal frequency
Frequency calibration
Reflow shift
Operating temperature range
Temperature rate of change
In‐service short term frequency
stability
Slope over temperature (ΔF/ΔT)
Supply voltage stability
Load sensitivity
Long term stability (ageing)
Acceleration sensitivity
Start‐up time
Supply voltage, VCC
Current C/Sine
Current HCMOS
Oscillator output – C/Sine
Oscillator output – HCMOS
Output voltage level high (VOH)
Output voltage level low (VOL)
Duty cycle
Rise & fall time
Control voltage
Tuning range
Input resistance
www.rakon.com
Min. Typ.
19.2 –
40
‐40
±10
±10
<2
2.5
2
4
0.8
Max.
±1.0
±0.5
85
1
±50 –
±250
±20 –
±100
±20
±200
5 – 15
5.7
Unit
MHz
ppm
ppm
°C
°C/min
ppb
Test Condition / Description
Standard frequencies: 19.2, 24.576, 25.0, 26.0,
30.72, 38.4 and 40.0MHz
Initial accuracy at 25°C ±1°C
Pre to post reflow ∆F (measured ≥ 60 minutes
after reflow)
Maximum rate of change of temperature
condition for guaranteed stability
specifications
All effects for 24 hours
ppb/°C
ppb
ppb
ppb/day
ppb/month
ppb/g
ms
V
mA
mA
Vpp
±2% variation
Reference to frequency at nominal supply
voltage
 HCMOS: ±1pF variation,
 Clipped sine wave: ±2% variation
Reference to frequency at nominal load
±1 ppm/year
±3 ppm/10year
Gamma vector, 3 axes, 30‐1500Hz
90% amplitude, time depends on nominal
frequency and use of internal filter capacitor
Standard values 3.0 and 3.3, other values
available upon request
Load 10pF//10kΩ
0.9VCC
45
0.5
±5
100
V
0.1VCC V
55
%
8
ns
2.5
V
±12
ppm
kΩ
At 50% level
Between 10% and 90%
sales@rakon.com
Page 1 of 2