LNO640D1 Datasheet, PDF (1/5 Pages) TEMEX – Low Noise Oscillator

Low Noise Oscillator series
LNO 640 D1
OCSO @ 640 MHz
Specific request can be addressed to RAKON [e-mail]
Product Description
LNO 640 D1 is a low noise and low G vibration isolated OCVCSO (Oven
Controlled Voltage Controlled SAW Oscillator) at 640 MHz, phase-
lockable on an external 10 MHz reference.
LNO 640 D1 provides excellent phase noise performance, and is
specially designed for airborne environment. The core oscillator is
internally suspended on shock absorbers.
LNO 640 D1 is available in a 70mm x 70mm x 35mm package.
Three operating modes are available, through Control Input signal:
 Free running
Control Input = Not connected
 Voltage controlled Control Input = DC Voltage
 Phase Lock Loop Control Input = 10 MHz Reference
Features
 Excellent phase noise performance (typical value) :
o -168 dBc/Hz @ 10kHz offset
o -174 dBc/Hz noise floor
Typical phase noise
Free running
PLL mode
 BIT Status: Ready or Alarm
Applications
 Airborne radars
LNO 640 D1 - Revision E – October 2014
1/5
www.rakon.com
Rakon reserves the right to modify herein specifications and information when necessary
to provide optimum performance and cost