LNO320D1 Datasheet, PDF (1/5 Pages) TEMEX – Low Noise Oscillator

Low Noise Oscillator series
LNO 320 D1
OCSO @ 320 MHz
Specific request can be addressed to RAKON [e-mail]
Product Description
LNO 320 D1 is a low noise and low G vibration isolated OCVCSO (Oven
Controlled Voltage Controlled SAW Oscillator) at 320 MHz, phase-
lockable on an external 10 MHz reference.
LNO 320 D1 provides excellent phase noise performance, and is specially
designed for airborne environment. The core oscillator is internally
suspended on shock absorbers.
LNO 320 D1 is available in a 70mm x 70mm x 35mm package.
Three operating modes are available, through Control Input signal:
 Free running
Control Input = Not connected
 Voltage controlled Control Input = DC Voltage
 Phase Lock Loop Control Input = 10 MHz Reference
Features
 Excellent phase noise performance (typical value) :
o -172 dBc/Hz @ 10kHz offset
o -178 dBc/Hz noise floor
Typical phase noise
Free running
PLL mode
 BIT Status: Ready or Alarm
Applications
 Airborne radars
LNO 320 D1 - Revision H – June 2016
1/5
www.rakon.com
Rakon reserves the right to modify herein specifications and information when necessary
to provide optimum performance and cost