LNO-320-D1 Datasheet, PDF (1/5 Pages) TEMEX – Specific request can be addressed to RAKON

Low Noise Oscillator series
LNO 320 D1
OCSO @ 320 MHz
Specific request can be addressed to RAKON [e-mail]
Product Description
LNO 320 D1 is a low noise and low G vibration isolated OCVCSO (Oven
Controlled Voltage Controlled SAW Oscillator) at 320 MHz, phase-
lockable on an external 10 MHz reference.
LNO 320 D1 provides excellent phase noise performance, and is
specially designed for airborne environment. The SAW oscillator is
suspended with vibration and shock absorbers included.
LNO 320 D1 is available in a 70mm x 70mm x 34.75mm package.
Three operating modes are available, through Control Input signal:
Free running
Control Input = Not connected
Voltage controlled Control Input = DC Voltage
Phase Lock Loop Control Input = 10 MHz Reference
Features
Excellent phase noise performance (typical value) :
o -174 dBc/Hz @ 10kHz offset
o -180 dBc/Hz noise floor
Typical phase noise
Free running
PLL mode
BIT Status: Ready or Alarm
Applications
Airborne radars
LNO 320 D1 - Revision F – October 2013
1/5
www.rakon.com
Rakon reserves the right to modify herein specifications and information when necessary
to provide optimum performance and cost