CI-F04 Datasheet, PDF (1/8 Pages) TEMEX – CI F04 and CI F05 are digital pulse compressors

Digital pulse compression module
CI F04 / CI F05 Compressor
To make an enquiry please email: [e-mail]
Product description
CI F04 and CI F05 are digital pulse compressors that
perform matched filtering of a radar return signal. CI
F04 is a stand alone single channel compressor with IF
analog I/Os while CI F05 is a dual channel compressor
with IF analog I/Os.
Both products may be customized to match linear or
non linear chirps to generate compressed pulse.
CI F0x may be used as a replacement of existing SAW
based pulse compressor to overcome device
obsolescence or enhance RADAR performances.
CI F0x compressor behavior and performances are
reproducible from one unit to the other. No matching
is needed.
Rakon-Temex will customize pulse compression filter
according to the characteristics requested by the
customer (Chirp duration, bandwidth, compressed
pulse width, chirp slope …).
The compressor unit is provided with FPGA
firmware loaded, including pulse compression filter.
Features
Digital pulse compression unit
CI F04 : One compressor channel with IF
analog I/Os
CI F05 : Two independent compressor
channels with IF analog I/Os
2 selectable waveforms for each
channel
High precision clock
BITE function
High BxT compression gain
Applications
SAW based pulse compression RADARS upgrade
Note: In this entire document, CI F0x stands for CI F04 or CI F05
March 15^th, 2013
CI F04 / CI F05 Compressor Revision A3
1/8
www.rakon.com