SGRF303 Datasheet, PDF (3/8 Pages) Teledyne Technologies Incorporated – SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT

Series SGRF300/SGRF303
DPDT Non-Latching Electromechanical Relay
Signal Integrity up to 18Gbps
SERIES SGRF300 AND SGRF303
TYPICAL RF INSERTION LOSS REPEATABILITY CHARACTERISTICS
(See RF Insertion Loss Repeatability Notes)
REPEATABILITY CHARACTERISTICS SGRF300 RELAYS
Normally Closed
100%
100%
Normally Open
80%
80%
60%
60%
40%
40%
20%
20%
0%
0
0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2
Repeatability (dB)
0%
0
0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2
Repeatability (dB)
REPEATABILITY CHARACTERISTICS SGRF303 RELAYS
100%
Normally Closed
80%
60%
40%
20%
0%
0
0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2
Repeatability (dB)
100%
Normally Open
80%
60%
40%
20%
0%
0
0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2
Repeatability (dB)
RF INSERTION LOSS REPEATABILITY NOTES
1. Test conditions: a. Fixture: .031" copper clad, reinforced PTFE, RT/duroid^® 6002 with SMA connectors.
(RT/duroid^® is a registered trademark of Rogers Corporation.)
b. Test performed at room ambient temperature.
c. Contact signal level: 20dBm.
2. Data presented herein represents typical characteristics and is not intended for use as specification limits.
3. Insertion loss repeatability measured over frequency range from 50MHz to 4GHz.
© 2010 TELEDYNE RELAYS
[phone] • www.teledynerelays.com
SGRF300/SGRF303 Page 3
SGRF300\SGRF303\102012\Q3