J422-6PM Datasheet, PDF (3/6 Pages) Teledyne Technologies Incorporated – MAGNETIC-LATCHING ESTABLISHED RELIABILITY TO-5 RELAYS

SERIES 420/422
OUTLINE DIMENSIONS
CASE DETAIL
.370
(9.40)
DIA. MAX.
.335
(8.51)
DIA. MAX.
.280 (7.11) MAX.
WIRE LEAD: .75 (19.05) MIN.
PIN: .187 (4.75) ± .010 (.25)
(See Note 6)
+.002 (.05)
.017(.43) _{–.001 (.03)} DIA.
.035 (.89)
± .010 (0.25)
.200 (5.08)
± .010 (.25) DIA.
TERMINAL LOCATIONS AND PIN NUMERING (REF ONLY)
(Viewed from Terminals)
.031 (.79)
± .003 (0.08)
.031 (.79)
± .003 (0.08)
.035 (.89)
± .010 (0.25)
.200 (5.08)
± .010 (.25) DIA.
36° ±3° TYP.
36° ±3° TYP.
10
9
1
8
2
7
3
6 ₅₄
420
422
DIMENSIONS ARE SHOWN IN INCHES (MILLIMETERS)
GENERAL NOTES
1. Relay contacts will exhibit no chatter in excess of 10 μsec
or transfer in excess of 1 μsec.
2. “Typical” characteristics are based on available data and
are best estimates. No on-going verification tests are
performed.
3. Unless otherwise specified, parameters are initial values.
4. For reference only. Coil resistance not directly measurable
at relay terminals due to internal series diode. 420DD and
422DD only.
5. Unless otherwise specified, relays will be supplied with
either gold-plated or solder-coated leads.
6. The slash and characters appearing after the slash are
not marked on the relay.
7. Screened HI-REL versions available. Contact factory.
8.
SCHEMATIC DIAGRAMS
COIL B
COIL B
COIL B
COIL A
420
COIL A
420D
COIL A
420DD
COIL B
COIL B
COIL B
COIL A
422
COIL A
422D
COIL A
422DD
SCHEMATICS ARE VIEWED FROM TERMINALS
CONTACTS SHOWN IN POSITION RESULTING WHEN COIL A LAST ENERGIZED
Teledyne Part Numbering System for T²R^® Established Reliability Relay
ER 422 X M - 26 A / S Q
Established Reliability
Designator
Relay Series
Optional Ground Pin
(See Appendix)
Pad Option
(See Appendix)
Teledyne Part Numbering System for Military Qualified (JAN) Relays
J 422 X M - 26 P L
Q= Solder Coated Leads
G= Gold Plated Leads
(Notes 5 and 6)
S= 0.187" leads
(Note 6)
Screening and Reliability
Level
Coil Voltage
Military (JAN)
Designator
Relay Series
Optional Ground Pin
(See Appendix)
Pad Option
(See Appendix)
Screening and Reliability
Level
Terminal Variant
P = 0.187"
Coil Voltage
©2003 TELEDYNE RELAYS
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
www.teledynerelays.com
420 422 Page 3
420 422/1203/Q1