PHT41470B Datasheet, PDF (2/2 Pages) Teledyne Technologies Incorporated – Up to 6 GHz Low Noise Silicon Bipolar Transistor

Electrical Specifications
Symbol Parameters and Test Conditions
NFo Optimum Noise Figure: VCE= 8 V, I_C = 10 mA
f =2.0 GHz
G_A
Gain @ NFo: VCE = 8 V, I_C = 10 mA
f =2.0 GHz
h_FE
Forward Current Transfer Ratio; V_CE = 8 V, I_C = 10mA
I_CBO
Collector Cutoff Current; V_CE = 8
I_EBO
Emitter Cutoff Current; V_EB = 1 V
Units
-55°C
+25°C
+150°C
Min Max Min Max Min Max
dB
1.9
dB
13.0
--
15
µA
µA
30 300
0.2
10
1.0
TMS UpScreen
Screening Test/Operation
Temperature Cycling
Constant Acceleration
High Temp. Reverse Bias
(HTRB)
Interim Electrical Tests
Table 1A 100% Screening
MIL-STD-750
Conditions
Method
1051
Condition C, Ta = -55°C to 175°C
20 cycles minimum
2006
20,000G, Y1 axis only,
1 min. hold does not apply
1039
Condition A, t= 48 hrs., Ta = +150 °C
VCB= 80% of rated BVCBO
------
+25°C; hFE, ICBO IEBO
Power Burn-in
Final Electrical Test
Group A, Subgroup 2
Delta Limits
Percent Defective Allowable
(PDA)
Hermeticity - Fine Leak
- Gross Leak
External Visual
1039
------
------
------
1071
1071
2071
Condition B, t= 160 hrs., Ta = +25°C,
Tj = +150°C
+25°C; hFE, ICBO IEBO
∆hFE = ±25%
∆ICBO = ±50 nA or ±100%,
whichever is greater
10% maximum applies to
Final Electrical and Deltas
Condition H1
Condition C or K
Group A Inspection
Subgroup1, Sample 22/0
Subgroup 3, Sample = 116/0
Subgroup 4, Sample = 116/0
Subgroup 5, 6 & 7 are not applicable
Marking - Dot units near pin 1
Shipment Packaging
------
Subgroup 1, Visual Mechanical
Subgroup 3, hFE @ -55°C, ICBO @ +150°C
Subgroup 4, NFo & G_A @ +25°C
(blue) unless directed otherwise
10 per strip
Marking: Manufacturer’s marking (if applicable) will remain on devices. TMS individual packaging will be
labeled with TMSPart Number and manufacturer date code. TMS shipment date code will appear on outer
label and C of C. Certificate of Conformance (C of C) will be sent with each shipment. This document provides
objective evidence of TMS testing and documents traceability to manufacturers wafer/lot identification.
Teledyne Microwave Solutions • 650-691-9800 • FAX: [phone] Specifications subject to change without notice.
PHT-41470B