PHT41410B Datasheet, PDF (2/2 Pages) Teledyne Technologies Incorporated – Up to 6 GHz Low Noise Silicon Bipolar Transistor

Electrical Specifications [1]
Symbol Parameters and Test Conditions
NFo Optimum Noise Figure: VCE= 8 V, I_C = 10 mA
f =2.0 GHz
G_A
Gain @ NFo: VCE = 8 V, I_C = 10 mA
f =2.0 GHz
h_FE
Forward Current Transfer Ratio; V_CE = 8 V, I_C = 10mA
I_CBO
Collector Cutoff Current; V_CE = 8
I_EBO
Emitter Cutoff Current; V_EB = 1 V
NOTE:
1. For this test, the emitter is grounded.
Units
-55°C
+25°C
+150°C
Min Max Min Max Min Max
dB
1.9
dB
13.0
--
15
µA
µA
30 300
0.2
10
1.0
Teledyne Cougar UpScreen
Screening Test/Operation
Temperature Cycling
Constant Acceleration
High Temp. Reverse Bias
(HTRB)
Interim Electrical Tests
Table 1A 100% Screening
MIL-STD-750
Conditions
Method
1051
Condition C, Ta = -55°C to 175°C
20 cycles minimum
2006
20,000G, Y1 axis only,
1 min. hold does not apply
1039
Condition A, t= 48 hrs., Ta = +150 °C
VCB= 80% of rated BVCBO
------
+25°C; hFE, ICBO IEBO
Power Burn-in
Final Electrical Test
Group A, Subgroup 2
Delta Limits
Percent Defective Allowable
(PDA)
Hermeticity - Fine Leak
- Gross Leak
External Visual
1039
------
------
------
1071
1071
2071
Condition B, t= 160 hrs., Ta = +25°C,
Tj = +150°C
+25°C; hFE, ICBO IEBO
∆hFE = ±25%
∆ICBO = ±50 nA or ±100%,
whichever is greater
10% maximum applies to
Final Electrical and Deltas
Condition H1
Condition C or K
Group A Inspection
Subgroup1, Sample 22/0
Subgroup 3, Sample = 116/0
Subgroup 4, Sample = 116/0
Subgroup 5, 6 & 7 are not applicable
Marking - Dot units near pin 1
Shipment Packaging
------
Subgroup 1, Visual Mechanical
Subgroup 3, hFE @ -55°C, ICBO @ +150°C
Subgroup 4, NFo & G_A @ +25°C
(blue) unless directed otherwise
10 per strip
Marking: Manufacturer’s marking (if applicable) will remain on devices. TMS individual packaging will be
labeled with TMS Part Number and manufacturer date code. TMS shipment date code will appear on outer
label and C of C. Certificate of Conformance (C of C) will be sent with each shipment. This document provides
objective evidence of TMS testing and documents traceability to manufacturers wafer/lot identification.
Teledyne Microwave Solutions • 650-691-9800 • FAX: [phone]
Specifications subject to change without notice.
PHT-41410B