PHA0135B Datasheet, PDF (2/2 Pages) Teledyne Technologies Incorporated – Cascadable Silicon Bipolar MMIC Amplifier

Electrical Specifications [ 1]
Symbol Parameters and Test Conditions
G_P
Power Gain (S₂₁²)
f =0.1 GHz
∆Gp Gain Flatness
f= 0.1 GHz-0.6 GHz
V_d
NOTE:
Device Voltage
@ 17 mA
1. The recommended operating current range for this device is 13 to 25 mA.
+25° C
Units
Min
dB
18.0
dB
V
4.5
Max
20.0
±1.0
5.5
Screening Test/Operation
Stabilization Bake
Temperature Cycling
Constant Acceleration
Pre Burn-in Electrical Test
(optional)
Burn-in
Final Electrical Test
Percent Defective Allowable
(PDA)
Hermeticity
Fine Leak
Gross Leak
External Visual
Shipment Packaging
T06 UpScreen
Table 2A 100% Screening
MIL-STD-883
Conditions
Method
1008
Condition C, Ta = +150 °C
t= 24 hrs.
1010
Condition C, -65 to +150°C,
10 cycles minimum
2001
Condition E, 30,000 G,
Y1 axis only
+25°C; G_p, ∆Gp and Vd
1015
-----
Condition B, t= 160 hrs.,
Ta = +125°C
+25°C; G_p, ∆Gp and Vd
5% max.; applies to 25°C
Final Electrical Test
1014
1014
2009
Condition A
Condition C
10 units per strip
Marking: Manufacturer’s marking (if applicable) will remain on devices. TMS individual packaging
will be labeled withTMS Part Number and manufacturer date code. TMS shipment date code will
appear on outer label and C of C. Certificate of Conformance (C of C) will be sent with each shipment.
This document provides objective evidence of TMS testing and documents traceability to manufacturers
wafer/lot identification.
Teledyne Microwave Solutions • 650-691-9800 • Fax: [phone]
Specifications subject to change without notice.
PHA-0135B