UTOUTC0520 Datasheet, PDF (1/5 Pages) Teledyne Technologies Incorporated – Thin-Film Cascadable Amplifier 5 to 500 MHz

Thin-Film Cascadable Amplifier
5 to 500 MHz
Technical Data
UTO/UTC 520 Series
Features
• Frequency Range: 5 to
500 MHz
• OutputPower: +12.0 dBm
• 5 Volt Supply
• Temperature Compensated
• Surface Mount Option
Applications
• IF/RF Amplification
• Surface Mount Assembly
• High Efficiency or Battery
Powered Systems
Description
The 520 Series is a highly-efficient
low-voltage unit for use where
power considerations are impor-
tant. Output choke coupling,
resistive feedback and active bias
combine to provide a low-noise
medium-gain amplifier that is
temperature compensated and
relatively insensitive to bias
voltage variations. Blocking
capacitors couple the RF through
the amplifier. The 520 Series
amplifiers are available in three
packages: the surface mount
PlanarPak PP-38 (.375 in. x
.375 in.) case, the TO-8 hermetic
case and the connectorized TC-1A
case.
Pin Configuration
UTO—TO-8T
GROUND
RFIN
RFOUT
V+
UTC—TC-1A
CASE GROUND
RF _IN
RFOUT
V+
Schematic
V+
RF_IN
Maximum Ratings
Parameter
DC Voltage
Continuous RF Input Power
Operating Case Temperature
RF_{OUT Storage Temperature}
“R” Series Burn-In Temperature
Thermal Characteristics¹
θ_JC
Active Transistor Power Dissipation
Junction Temperature Above Case Temperature
MTBF (MIL-HDBK-217E, A_UF @ 90°C)
Maximum
+10 Volts
+13 dBm
–55 to +125°C
–62 to +150°C
+125°C
105°C/W
108 mW
11°C
1,012,000 Hrs.
Weight: (typical) PPA—0.5 grams; UTO—2.1 grams; UTC—21.5 grams