UTM1056 Datasheet, PDF (1/4 Pages) Teledyne Technologies Incorporated – Thin-Film Cascadable Amplifier 10 to 1000 MHz

Thin-Film Cascadable Amplifier
10 to 1000 MHz
Technical Data
UTM-1056
Features
• Frequency Range: 10 to
1000 MHz
• MODAMP Silicon Monolithic
Gain Stages
• High Gain: 26.5 dB (Typ)
• Low VSWR
Applications
• IF/RF Amplification
Description
The UTM-1056 contains three
monolithic microwave integrated
circuits mounted on a thin-film
substrate to provide an RF
amplifier suitable for wideband,
high-gain applications. Internal
blocking capacitors couple the RF
through this three-stage amplifier.
The UTM-1056 is offered in the
TO-8 hermetic package.
Pin Configuration
UTM—TO-8T
GROUND
RFIN
RFOUT
V+
CASE GROUND
Schematic
V+
RF_IN
Maximum Ratings
Parameter
DC Voltage
Continuous RF Input Power
RF_OUT Operating Case Temperature
Storage Temperature
“R” Series Burn-In Temperature
Maximum
+17 Volts
+20 dBm
–55 to +125°C
–62 to +150°C
+100°C
Thermal Characteristics¹
θ_JC
Active Transistor Power Dissipation
100/90/90°C/W²
175/240/308 mW²
Junction Temperature Above Case Temperature 18/22/28°C²
MTBF (MIL-HDBK-217E, A_UF @ 90°C)
284,100 Hrs.
Notes:
1. Values refer to 1st, 2nd, 3rd stage transistors respectively.
Weight: (typical) UTM—2.1 grams