UTM1053 Datasheet, PDF (1/4 Pages) Teledyne Technologies Incorporated – Thin-Film Cascadable Amplifier 5 to 1000 MHz

Thin-Film Cascadable Amplifier
5 to 1000 MHz
Technical Data
UTM-1053
Features
• Frequency Range: 5 to
1000 MHz
• MODAMP Silicon Monolithic
Gain Stages
• High Gain: +30 dB (Typ)
• Low VSWR
Applications
• IF/RF Amplification
Description
The UTM-1053 contains three
silicon monolithic microwave
integrated circuit RF amplifiers
mounted on a thin-film substrate
to provide wideband, high gain
performance. Internal blocking
capacitors couple the RF though
this three-stage amplifier. The
UTM-1053 is available in the TO-8
hermetic package.
Pin Configuration
UTM—TO-8U
GROUND
RFIN
RFOUT
V+
CASE GROUND
Schematic
V+
RF_IN
Maximum Ratings
Parameter
DC Voltage
Continuous RF Input Power
Operating Case Temperature
RF_OUT ^{Storage Temperature}
“R” Series Burn-In Temperature
Maximum
+17 Volts
+17 dBm
–55 to +125°C
–62 to +150°C
+125°C
Thermal Characteristics¹
θ_JC
Active Transistor Power Dissipation
130/130/130°C/W²
125/125/175 mW²
Junction Temperature Above Case Temperature 16/16/23°C²
MTBF (MIL-HDBK-217E, A_UF @ 90°C)
535,000 Hrs.
Notes:
1. Values refer to 1st, 2nd, 3rd stage transistors respectively.
Weight: (typical) UTM—2.1 grams