UTL10011002 Datasheet, PDF (1/5 Pages) Teledyne Technologies Incorporated – Voltage-Controlled Signal Limiter 5 to 1000 MHz

Voltage-Controlled Signal Limiter
5 to 1000 MHz
Technical Data
UTL-1001/1002
Features
• 0 to –13 dBm Programmable
Output
• VSWR less than 2.0:1
Applications
• Protection for Detectors,
Mixers, and Amplifiers
• Cascadable Gain Control
• EW Receiver Circuits
• Wideband System Protection
Description
The UTL Series consists of two
voltage controlled signal limiters
which cover the 5 to 1000 MHz
frequency range. These thin-film
limiters feature voltage program-
mable output levels with input
levels as high as +26 dBm. They
have low VSWR, low insertion
loss, and excellent second- and
third-harmonic suppression.
Recovery from fully saturated
input levels is less than 50 nano-
seconds. The UTL models are
provided in the TO-8 package.
Pin Configuration
TO-8U
GROUND
RFIN
RFOUT
V+
CASE GROUND
Schematic
V+
RF_IN
Maximum Ratings
Parameter
RF_OUT
DC Voltage
Continuous RF Input Power
Peak Input Power (3 µsec Max.)
Operating Case Temperature
Storage Temperature
“R” Series Burn-In Temeprature
Weight: (typical) 2.1 grams
Maximum
+25.0 V
+26.0 dBm
+30 dBm
–54°C to +125°C
–62°C to +150°C
+125°C