PHA0835B Datasheet, PDF (1/2 Pages) Teledyne Technologies Incorporated – Cascadable Silicon Bipolar MMIC Amplifier

Cascadable Silicon Bipolar
MMIC Amplifier
Description
The PHA-0835B is a high performance silicon bipolar
Monolithic Microwave Integrated Circuit (MMIC)
housed in a microstrip package. This product is
designed for use as a general purpose 50 Ω gain
block. Typical applications include narrow and broad
band IF and RF amplifiers in industrial and military
applications.
TMS is not the original device manufacturer.
TMS procures commercial off the shelf product
and UpScreens per the following process flow. For
custom screening requirements, Quality Conformance
Inspection, or additional electrical selection, please
contact TMS.
Technical Data
PHA-0835B Suggested Maximum Ratings
Parameter
Suggested Maximum ^[1]
Device Current
80 mA
RF Input Power
+13 dBm
Junction Temperature
+200°C
Storage Temperature
-65 to +150°C
NOTE:
1. Permanent damage may occur if any of these limits are exceeded.
PHA-0835B
35 micro-X Package Dimensions
0.040
Gnd
RF in
0.02
RF Out
0.004
± 0.002
Gnd
0.070
0.495 ± 0.030
0.035
NOTES: (Unless otherwise specified)
1. Dimensions are in inches
2. Tolerances: X.XXX = ±0.005
Typical Biasing Configuration
10V
7.8 V
Teledyne Microwave Solutions • 650-691-9800 • FAX: [phone]
Specifications subject to change without notice.
Teledyne Cougar • 408.522.3838 • FAX: [phone]
Specifications subject to change without notice.
PHA-0835B