LS24D16C Datasheet, PDF (1/6 Pages) Teledyne Technologies Incorporated – 30A to 600 Vac SIP Package DC control

Series LS
30A to 600 Vac SIP Package
DC control
Part Number
LS24D16C
LS24D21C
LS60D22C
LS24D27C
LS60D27C
LS60D30C
Description
16A, 240 Vac
21A, 240 Vac
22A, 600 Vac
27A, 240 Vac
27A, 600 Vac
30A, 600 Vac
Part Number Explanation
LS
24
D
16
C
NOTES
1) Line Voltage (nominal): 24 = 240 Vac; 60 = 600 Vac
2) Switch Type: D = Zero-cross turn-on
3) Control Range: C = 4-14 Vdc (N = 8-32 Vdc also available)
MECHANICAL SPECIFICATION
Hot surface: 1.48 (37.6)
.01 (0.3)
43
2
1
.31
(7.83)
Ø1
0.2 (5.08) _0.4
0.5 (12.7) (10.16)
1.82 (43.6)
0.3
(7.83)
.07 (1.7)
.25 (6.3)
.07 (1.7)
Top view
Hole Ø .06 (1.6)
0.1 (2.54)
WEIGHT: 0.53 oz. (15g)
TOLERANCES: ^+–0.01
Figure 1 — LS relays; dimensions in inches (mm)
(See Figure 12 for LS with HS1)
TYPICAL APPLICATION
L1
L1
FEATURES/BENEFITS
• Industry standard package
• Designed for external heat-sink attachment
• Over-sized thyristor ratings
• Direct-copper bonding technology
DESCRIPTION
These solid-state single inline package (SIP) relays
are designed for mounting on printed circuit boards.
The Series LS relays facilitate heat sinking by
providing an interface surface. The relays are
designed with 16A, 25A and 50A thyristors. They can
switch loads with high starting currents. The nominal
switched currents depend on the size of the heat sink
and are limited by the cross section of the tracks of
the printed circuit (mainly 25A/30A). The relays use
a direct-bonded copper substrate for thermal
efficiency, thermal stress performance and long-life
expectancy.
APPLICATIONS
• Motor control — Pumps, reversing, integration of
relays in terminal boxes
• Lamp control — Infrared drying, traffic lights,
theater lighting
APPROVALS
All models are UL recognized.
UL File Number: E128555.
SSR
MOV on
the PCB
Or
Load
MOV on
the PCB
Load
SSR
N
N
Figure 2 — LS relays
BLOCK DIAGRAM
3+
Rc ^Ic
Vc
4–
Figure 3 — LS relays
© 2003 TELEDYNE RELAYS
[phone] • www.teledynerelays.com
1~
2~
LS 1
LS\032003\Q2