EPC24N10A Datasheet, PDF (1/5 Pages) Teledyne Technologies Incorporated – Up to 110A 460 Vac Phase Angle Controller

Part Number
EPC24N10A
EPC24N40A
EPC24N40R
EPC46N70A
EPC46N110A
Description
10A, 265 Vac
40A, 265 Vac
40A, 265 Vac
70A, 460 Vac
110A, 460 Vac
Part Number Explanation
EPC
24
N
10
A
NOTES
1) Line Voltage (nominal): 24 = 240 Vac; 46 = 460 Vac
2) Switch Type: N = Phase Angle Control
3) Control Range: A = 0-10 Vdc; R = 4-20 mAdc
MECHANICAL SPECIFICATION
1.55 (39.5)
.17
(4.4)
3.26 (82.7)
1.57 _2.89
(40) _(73.5)
Series EPC
Up to 110A 460 Vac
Phase Angle Controller
FEATURES/BENEFITS
• External phase angle adjust
• Designed for all loads
• Excellent thermal performance
• Internal output protection
• Proportional control with voltage or current input.
DESCRIPTION
The Series EPC phase angle controller has an analog
input isolated from the mains to vary the phase angle
proportionally to the input and load voltage. The EPC
phase angle controller is designed mainly for resistive
loads. The EPC may be used with inductive loads,
but with limitations. It provides internal protection from
load transients. The conduction level is controlled by
the input. The Series EPC provides an external adjust
that allows the user to modify the cycle time for any
particular application.
APPLICATIONS
• Lighting control (light dimming)
• Single-phase motors
• Heating control (regulation)
3.58 (91)
3.94 (100)
WEIGHT: 14.46 oz. (410g)
Figure 1 – EPC relays; dimensions in inches (mm)
TYPICAL APPLICATION
L1 L2
+
Power
supply
–
cycle Time
© 2003 TELEDYNE RELAYS
Cycle time adjust
Load
Figure 2 – EPC relays
[phone] • www.teledynerelays.com
EPC 1
EPC\032003\Q1