DTS6014 Datasheet, PDF (1/2 Pages) Teledyne Technologies Incorporated – 0.1 TO 6.0 GHz THRESHOLD DETECTOR

Rev. 7/10
DTS6014
0.1 TO 6.0 GHz
THRESHOLD DETECTOR
Typical Values @ +25 °C
DTS6014
Wide Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . 0.05 to 8.0 GHz
Wide Power Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . -12.0 to +12.0 dBm
Fast Response Time . . . . . . . . . . . . . . . . . . . . . . . . . . .
800 ηsec
TTL Output Compatibility
External Adjustable Threshold Level, Low Drift
Standard SMTO-8 Package
SPECIFICATIONS^*
Parameter
Typical
Frequency (Min.)
0.05-8.0 GHz
Input Power Range (Min.)
VSWR (Max.)
Power Flatness (Max.)
Threshold Temperature Stability
(Max.) @ -10 dBm Input Power
@ 0 dBm Input Power
@ +10 dBm Input Power
Pulse Response (Max.)
Rise Time (10% DC to 90% DC)
Fall Time (90% DC to 10% DC)
Total Response Time
(50% RF to 10% or 90% DC)
Supply Current (Max.) (no RF)
Supply Current (Max.)
Pin = +5.0 dBm
Threshold Hysteresis
@ -10 to -1 dBm Input Power
@ 0 to +10 dBm Input Power
Control Terminate Current (Max.)
Output Compatibility
-12 to +12 dBm
1.5:1
±0.5 dB
±0.75 dB
±0.5 dB
±0.3 dB
360 ηsec^
65 ηsec^
800 ηsec^
2 mA
2 mA
±1.0 dB†
±0.3 dB†
0.3 mA
TTL
Guaranteed
0 to 50 °C -55 to +85 °C
0.1-6.0 GHz
0.1-6.0 GHz
-10 to +10 dBm
2.0:1
±0.75 dB
-10 to +10 dBm
2.0:1
±0.75 dB
±1.0 dB
±0.75 dB
±0.6 dB
±1.0 dB
±1.0 dB
±0.75 dB
700 ηsec^
150 ηsec^
1500 ηsec^
4 mA
1000 ηsec^
200 ηsec^
2000 ηsec^
5 mA
4 mA
5 mA
±1.5 dB†
±1.0 dB†
1.0 mA
TTL
±2.0 dB†
±1.5 dB†
1.0 mA
TTL
*Measured in a 50 Ohm system at +5.0 Vdc. R_TH=120 to 2800 Ohm unless otherwise specified.
1 MOhm 8pF output load. ^ Input change ≥3 dBm above P threshold and applied for entire dynamic
range. † Apply for both resistance and voltage control.
MAXIMUM RATINGS
DC Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+20 V
Continuous RF Input Power . . . . . . . . . . . . . . . . . . . . .
+20.0 dBm
Operating Case Temperature . . . . . . . . . . . . . . . . . . . . -55 °C to +125 °C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 °C to +150 °C
Burn-In Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . .
+150 °C
Detector Thermal Resistance¹ (θjc) . . . . . . . . . . . . . . .
+800 °C/Watt
Temperature Rise @ 10 dBm (Tjc) . . . . . . . . . . . . . . . .
+8 °C
1 _{Thermal resistance is based on RF input power. Ratings based on +25 °C.}
APPLICATION NOTES
DTS6014 is a sensitive microwave threshold detector which provides efficient and accurate
RF level measurement.
DTS6014 is configured using two Schottky diode detectors, high precision comparator, and
a compensated voltage reference to provide excellent temperature stability.
DTS6014 is specifically designed for system built-in test and channel RF activity monitoring.
The output of this unit is derived from a comparator, a true TTL logic device.
Average power detection is obtained at power levels below approximately 0 dBm.
DTS6014 contains open-collector comparator with internal 5.1 KOhm pull-up resistor. Pulse
response (Low-to-Hi state) can be sped up by using external pull-up resistor. Max sink cur-
rent is 6.0 mA.
Connect external threshold resistor from Rcntl port to ground.
DTC6014
TO-8 Package for Detectors
DTS6014
SMTO-8 for Detectors
DIMENSIONS ARE IN INCHES [MILLIMETERS]
650-691-9800 • Fax: [phone] • Updates: www.teledynemicrowave.com • [e-mail]