C47F-10 Datasheet, PDF (1/2 Pages) Teledyne Technologies Incorporated – Bi-Directional AC/DC Solid State Relay

TELEDYNE RELAYS
ELECTRICAL SPECIFICATIONS
(25°C UNLESS OTHERWISE SPECIFIED)
C46F/C47F Series
Bi-Directional AC/DC Solid State Relay
INPUT (CONTROL) SPECIFICATIONS
Parameter
Min
Max Units
Control Voltage Range (See Figures 1, 2 and Note 1)
3.8
32
Vdc
Input Current @ 5 V (See Figures 1 and 2)
14
mAdc
Must Turn-On Voltage
3.8
Vdc
Must Turn-Off Voltage (Guaranteed Off)
1.5
Vdc
Reverse Voltage Protection
-32
Vdc
OUTPUT (LOAD) SPECIFICATIONS
Parameter
DC
Bi-directional
Parameter
Min Max
Min
Max Units
C47F-10
50 C46F-10
±50
Load Voltage Rating
C47F-20
C47F-30
90 C46F-20
180 C46F-30
±90
Vdc
±180
C47F-40
360 C46F-40
±360
C47F-10
1.75 C46F10
1.0
(See Figure 3)
Output Current Rating
C47F-20
C47F-30
1.0 C46F-20
0.6 C46F-30
0.75
Adc
0.4
C47F-40
0.4 C46F-40
0.25
C47F-10
0.15 C46F-10
0.3
On Resistance
(See Note 3)
C47F-20
C47F-30
0.35 C46F-20
1.0 C46F-30
0.7
Ohms
2.0
C47F-40
2.0 C46F-40
4.0
Leakage Current at 80% of VL
1.0
1.0
mAdc
Surge Rating (% of Rated) <1 sec
200
200
%
Turn On Time
C47F-10
3 C46F-10,30,40 2.5
ms
C47F-20,30,40
1.5 C46F-10,20
3
Turn Off Time
1.0
1.0
ms
C47F-10
700 C46F-10
700
Output Capacitance
(Typical)
C47F-20
C47F-30
350 C46F-20
300 C46F-30
350
pF
300
C47F-40
Isolation (Input to Output)
250 C46F-40
10⁹
250
10⁹
Ohms
Dielectric Strength (Input to Output)
1500
1500 Vac
Capacitance (Input to Output)
10
10
pF
Junction Temperature (T_J)
125
125
°C
FEATURES/BENEFITS
• Power FET output with Very
Low On Resistance - Virtually
no offset with low leakage and
voltage drop.
• Switches High Voltages and
Currents - Voltages to 360 Vdc.
Current to 1.75 Adc. DC, Bi-
directional or AC models
• Optical Isolation - Isolates
control elements from load
transients. Eliminates ground
loops and signal ground noise.
• Floating Output - Allows for
high and low side switching.
• High Noise Immunity - Control
circuit can not be triggered by
output switching noise.
• 14 Pin DIP Package
DESCRIPTION
These miniature solid state relays
utilize a photo-voltaic generator
driving high performance power
FET chips to provide low output
on-resistance and high output
switching capability. The series
includes DC switching versions
with output current ratings up to
1.75 amp, and bi-directional
versions to switch AC or DC up to
1.0 amp. Output voltage ratings of
both types range from 50 to 360
volts. The virtual elimination of
offset voltage makes them ideal
for low level switching applications
as well. Input and output are
optically isolated to protect input
logic circuits from output voltage
transients.
©2000 TELEDYNE RELAYS
800-284-7007 • www.teledynerelays.com
page 55