AC848 Datasheet, PDF (1/2 Pages) Teledyne Technologies Incorporated – 10 TO 800 MHz TO-8 CASCADABLE AMPLIFIER

Rev. 5/10
AC848
Typical Values
Low Noise Figure . . . . . . . . . . . . . . . . . . . . . . . .
Medium Output Level . . . . . . . . . . . . . . . . . . . . .
High Third Order I.P. . . . . . . . . . . . . . . . . . . . . . .
High Performance Thin Film
Standard Size TO-8
10 TO 800 MHz
TO-8 CASCADABLE AMPLIFIER
AC848
<4.0 dB
+19.3 dBm
34 dBm
AC848
TO-8 Package for Amplifiers
SPECIFICATIONS^*
Parameter
Frequency (Min.)
Small Signal Gain (Min.)
Gain Flatness (Max.)
Noise Figure (Max.)
SWR (Max.)
Input/Output
Power Output (Min.)
@ 1dB comp.
DC Current (Max.)
Typical
5-900 MHz
13.2 dB
±0.2 dB
<4.0 dB
<1.5:1
+19.3 dBm
58.0 mA
Guaranteed
0 to 50 °C -55 to +85 °C
10-800 MHz
10-800 MHz
12.5 dB
12.0 dB
±0.4 dB
±0.5 dB
4.5 dB
5.0 dB
1.8:1
2.0:1
+18.5 dBm
62.0 mA
+18.0 dBm
66.0 mA
* Measured in a 50-ohm system at +15 Vdc unless otherwise specified.
INTERMODULATION PERFORMANCE
Typical @ 25 °C
+12 Volts
Second Order Harmonic Intercept Point . . . . . +50 dBm
Second Order Two Tone Intercept Point . . . . . . +44 dBm
Third Order Two Tone Intercept Point . . . . . . . . +33 dBm
+15 Volts
+49 dBm
+43 dBm
+34 dBm
AS848
SMTO-8 Package for Amplifiers
ABSOLUTE MAXIMUM RATINGS
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -62 to +125 °C
Maximum Case Temperature . . . . . . . . . . . . . . . . . . . . . . . .
+125 °C
Maximum DC Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+17 Volts
Maximum Continuous RF Input Power . . . . . . . . . . . . . . . .
+13 dBm
Maximum Short Term Input Power (1 Minute Max.) . . . . . . . 50 Milliwatts
Maximum Peak Power (3 µsec Max.) . . . . . . . . . . . . . . . . . .
0.5 Watt
Burn-in Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+85 °C
Thermal Resistance¹ (θjc) . . . . . . . . . . . . . . . . . . . . . . . . . . +56 °C/Watt
Junction Temperature Rise Above Case (Tjc) . . . . . . . . . . .
+51.0 °C
1 _{Thermal resistance is based on total power dissipation.}
If DC is present on RF input/output, this model
requires additional external blocking capacitors.
DIMENSIONS ARE IN INCHES [MILLIMETERS]
650-691-9800 • Fax: [phone] • Updates: www.teledynemicrowave.com • [e-mail]