AC1292 Datasheet, PDF (1/2 Pages) Teledyne Technologies Incorporated – 30 TO 1400 MHz TO-8 CASCADABLE AMPLIFIERS

Rev. 10/11
AC1291
AC1292
30 TO 1400 MHz
TO-8 CASCADABLE AMPLIFIERS
Typical Values
Low Noise Figure . . . . . . . . . . . . . . . . . . . . . . . .
Medium Output Power . . . . . . . . . . . . . . . . . . . .
High Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
High Performance Thin Film
Standard Size TO-8 Package
AC1291
1.3 dB
+19.5 dBm
18.0 dB
AC1292
<1.3 dB
+22.0 dBm
18.5 dB
AC1291/AC1292
TO-8 Package for Amplifiers
SPECIFICATIONS^*
Parameter
Typical
Frequency (Min.)
30-1400 MHz
Small Signal Gain (Min.)
AC1291
AC1292
Gain Flatness (Max.) AC1291
AC1292
Noise Figure (Max.)
200-1400 MHz
SWR (Max.)
Input/Output
Power Output (Min.)
@ 1dB comp.
AC1291
AC1292
Reverse Isolation
AC1291
AC1292
DC Current (Max.)
AC1291
AC1292
18.0 dB
18.5 dB
±0.5 dB
±0.5 dB
1.3 dB
1.5:1
+19.5 dBm
+22.0 dBm
22.0 dB
23.0 dB
63.0 mA
100.0 mA
Guaranteed
0 to 50 °C -55 to +85 °C
30-1400 MHz
30-1400 MHz
16.5 dB
17.0 dB
±0.9 dB
±0.7 dB
1.5 dB
1.8:1^
+18.5 dBm
+21.0 dBm
—
—
68.0 mA
105.0 mA
16.0 dB
16.5 dB
±1.0 dB
±0.8 dB
1.8 dB
1.9:1^
+18.0 dBm
+20.5 dBm
—
—
70.0 mA
108.0 mA
* Measured in a 50-ohm system at +5 Vdc unless otherwise specified.
^ Input VSWR 0.3 higher below 50 MHz.
INTERMODULATION PERFORMANCE
Typical @ 25 °C; 500 MHz
Second Order Harmonic Intercept Point. .
Second Order Two Tone Intercept Point . .
Third Order Two Tone Intercept Point . . . .
AC1291
+51 dBm
+45 dBm
+32 dBm
AC1292
+56 dBm
+50 dBm
+36 dBm
AS1291/AS1292
SMTO-8 Package for Amplifiers
ABSOLUTE MAXIMUM RATINGS
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum Case Temperature . . . . . . . . . . . . . . . . . . . . . . . .
Maximum DC Voltage (AC1291) . . . . . . . . . . . . . . . . . . . . .
Maximum DC Voltage (AC1292) . . . . . . . . . . . . . . . . . . . . .
Maximum Continuous RF Input Power . . . . . . . . . . . . . . .
Maximum Short Term Input Power (1 Minute Max.) . . . . . .
Maximum Peak Power (3 µsec Max.; AC1291) . . . . . . . . . .
Maximum Peak Power (3 µsec Max.; AC1292) . . . . . . . . . .
Burn-in Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thermal Resistance¹ (θjc; AC1291) . . . . . . . . . . . . . . . . . . .
Thermal Resistance¹ (θjc; AC1292) . . . . . . . . . . . . . . . . . . .
Junction Temperature Rise Above Case (Tjc; AC1291) . . .
Junction Temperature Rise Above Case (Tjc; AC1292) . . .
1 _{Thermal resistance is based on total power dissipation.}
-62 to +125 °C
+125 °C
+12 Volts
+10 Volts
+21 dBm
+24 dBm
+27 dBm
+25 dBm
+125 °C
+49.3 °C/Watt
+53 °C/Watt
+15.5 °C
+26 °C
DIMENSIONS ARE IN INCHES [MILLIMETERS]
650-691-9800 • Fax: [phone] • Updates: www.teledynemicrowave.com • [e-mail]