AC1069 Datasheet, PDF (1/2 Pages) Teledyne Technologies Incorporated – 10 TO 1000 MHz TO-8 CASCADABLE AMPLIFIERS

Rev. 5/10
AC1068
AC1069
10 TO 1000 MHz
TO-8 CASCADABLE AMPLIFIERS
Typical Values
High Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
High Output Power . . . . . . . . . . . . . . . . . . . . . . .
High Third Order I.P. . . . . . . . . . . . . . . . . . . . . . .
Low Noise Figure . . . . . . . . . . . . . . . . . . . . . . . .
High Performance Thin Film
Standard Size TO-8 Package
Available in Surface Mount
AC1068
24.5dB
+18.5 dBm
+32.0 dBm
3.7 dB
AC1069
24.5 dB
+21.5 dBm
+34.0 dBm
4.0 dB
AC1068/AC1069
TO-8 Package for Amplifiers
SPECIFICATIONS^*
Parameter
Frequency (Min.)
Small Signal Gain (Min.)
AC1068/AC1069
Gain Flatness (Max.)
Noise Figure (Max.) AC1068
AC1069
SWR (Max.)
Input/Output
Power Output (Min.)
@ 1dB comp.
AC1068
AC1069
Reverse Isolation
DC Current (Max.)
AC1068
AC1069
Typical
5-1200 MHz
24.5 dB
< ±0.25 dB
3.7 dB
4.0 dB
< 1.5:1
+18.5 dBm
+21.5 dBm
34.0 dB
97.0 mA
129.0 mA
Guaranteed
0 to 50 °C -55 to +85 °C
10-1000 MHz
10-1000 MHz
23.5 dB
±0.5 dB
5.0 dB
5.5 dB
1.7:1
22.5 dB
±0.7 dB
5.5 dB
6.0 dB
1.8:1
+17.5 dBm
+20.0 dBm
—
103.0 mA
135.0 mA
+17.0 dBm
+19.5 dBm
—
110.0 mA
140.0 mA
* Measured in a 50-ohm system at +15 Vdc unless otherwise specified.
INTERMODULATION PERFORMANCE
Typical @ 25 °C
AC1068
Second Order Harmonic Intercept Point . . . . . +54 dBm
Second Order Two Tone Intercept Point . . . . . . +48 dBm
Third Order Two Tone Intercept Point . . . . . . . . +32 dBm
AC1069
+51 dBm
+45 dBm
+34 dBm
AS1068/AS1069
SMTO-8 Package for Amplifiers
ABSOLUTE MAXIMUM RATINGS
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -62 to +125 °C
Maximum Case Temperature . . . . . . . . . . . . . . . . . . . . . . . .
+125 °C
Maximum DC Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+19 Volts
Maximum Continuous RF Input Power . . . . . . . . . . . . . . . .
+13 dBm
Maximum Short Term Input Power (1 Minute Max.) . . . . . . 100 Milliwatts
Maximum Peak Power (3 µsec Max.) . . . . . . . . . . . . . . . . . .
0.5 Watt
Burn-in Temperature AC1068/AC1069 . . . . . . . . . . . . . . . . +105 °C/+95 °C
Thermal Resistance¹ (θjc; AC1068) . . . . . . . . . . . . . . . . . . . +26 °C/Watt
Thermal Resistance¹ (θjc; AC1069) . . . . . . . . . . . . . . . . . . . +23 °C/Watt
Junction Temperature Rise Above Case (Tjc; AC1068) . . .
+40.8 °C
Junction Temperature Rise Above Case (Tjc; AC1069) . . .
+46.0 °C
1. Thermal resistance is based on total power dissipation.
DIMENSIONS ARE IN INCHES [MILLIMETERS]
650-691-9800 • Fax: [phone] • Updates: www.teledynemicrowave.com • [e-mail]