TCN4040 Datasheet, PDF (7/9 Pages) TelCom Semiconductor, Inc – PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

PRECISION MICROPOWER
SHUNT VOLTAGE REFERENCE
PRELIMINARY INFORMATION
TCN4041
ELECTRICAL CHARACTERISTICS (Cont.): Boldface type specifications apply for T_A = T_J = T_MIN to T_MAX. All other
specifications; T_A = T_J = 25°C. The grades C, D, and E designate initial
Reverse Breakdown Voltage tolerances of ±0.5%, ±1.0%, and ±2.0%,
respectively.
TCN4041CEOA
TCN4041CENB
TCN4041CEZB
TCN4041DEOA
TCN4041DENB
TCN4041DEZB
TCN4041EENB
TCN4041EEZB
Symbol Parameter
Test
Conditions
Min Typ Max Min Typ Max Min Typ Max Unit
e_N
Wideband Noise
I_R =100µA,
— 20 —
— 20 — — 20 — µVmsec
10Hz ≤ f ≤ 10kHz
Notes 4, 5
∆V_R
Reverse Breakdown t =1000hrs
— 120 —
— 120 — — 120 — ppm/°C
Voltage Long Term T = 25°C ±0.1°C
Stability
I_R =100µA
Notes 4, 5
NOTES: 4. Typicals are at T_J = 25°C and represent most likely parametric norm.
5. Limits are 100% production tested at 25°C.
6. The boldface (over-temperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown
Voltage Tolerance ±[(∆V_R/∆T)(65°C)(V_R)]. ∆V_R/∆T is the V_R temperature coefficient, 65°C is the temperature range from – 40°C to the
reference point of 25°C, and V_R is the reverse breakdown voltage. The total over-temperature tolerance for the different grades is shown
below:
C-grade: ±1.15% = ±0.5% ±100ppm/°C x 65°C
D-grade: ±1.98% = ±1.0% ±150ppm/°C x 65°C
E-grade: ±2.98% = ±2.0% ±150ppm/°C x 65°C
7. When VOUT ≤ 1.6V, the TCN4041-ADJ in the SOT-23B package must operate at reduced IR. This is caused by the series resistance of the
die attach between the die (-) output and the package (-) output pin. See the Output Saturation (SOT23-B only) curve in the Typical
Characteristics section.
8. Reference voltage and temperature coefficient will change with output voltage. See Typical Characteristics curves.
PIN CONFIGURATION
TO-92-3
123
TCN4041EZB-1.2V
123
NC ^{+ –}
TCN4041-ADJ
SOT-23B-3*
(TOP VIEW)
NC
1
2
3
+
–
TCN4041ENB-1.2V
NC
1
2
3
+
–
8-Pin SOIC
NC ₁
NC ₂
NC 3
–4
8⁺
7 NC
6 NC
5 NC
TCN4041EOA-1.2V
NC ₁
NC ₂
NC 3
–4
8⁺
7 NC
6 NC
5 NC
TCN4041ENB-ADJ
NOTE: *SOT-23B-3 is equivalent to the JEDEC (TO-236)
TCN4041EOA-ADJ
TCN4041-01 6/19/97
3