TC232 Datasheet, PDF (2/3 Pages) TelCom Semiconductor, Inc – DUAL RS-232 TRANSMITTER/RECEIVER AND POWER SUPPLY

DUAL RS-232 TRANSMITTER/
RECEIVER AND POWER SUPPLY
TC232
ABSOLUTE MAXIMUM RATINGS*
V_CC ............................................................................. +6V
V⁺ ........................................................................... +12V
V^– ........................................................................... +12V
Input Voltages
T1_IN, T2_IN .................................... –0.3 to (V_CC +0.3V)
R1_IN, R2_IN ......................................................... ±30V
Output Voltages
T1_OUT, T2_OUT ...................... (V⁺ +0.3V) to (V^– –0.3V)
R1_OUT, R2_OUT .............................. –0.3 to (V_CC +0.3V)
Short Circuit Duration
V⁺ .................................................................... 30sec
V^– .................................................................... 30sec
T1_OUT, T2_OUT .......................................... Continuous
Storage Temperature Range .................. -65°C to +150°C
Package Power Dissipation (T_A ≤ 70°C)
CerDIP ............................................................890mW
Derate 9.5 mW/°C Above +70°C
Plastic DIP ...................................................... 840mW
Derate 7 mW/°C Above +70°C
Small Outline (SOIC) ...................................... 760mW
Derate 7 mW/°C Above +70°C
*Static-sensitive device. Unused devices must be stored in conductive
material. Protect devices from static discharge and static fields. Stresses
above those listed under "Absolute Maximum Ratings" may cause perma-
nent damage to the device. These are stress ratings only and functional
operation of the device at these or any other conditions above those
indicated in the operation sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods may
affect device reliability.
ELECTRICAL CHARACTERISTICS: V_CC = 5V ±10%, T_A = operating temperature range, test circuit unless
otherwise noted.
Parameter
Output Voltage Swing
Power Supply Current
Input Logic Threshold Low
Input Logic Threshold High
Logic Pull-Up Current
RS-232 Input Voltage Operating Range
RS-232 Input Threshold Low
RS-232 Input Threshold High
RS-232 Input Hysteresis
RS-232 Input Resistance
TTL/CMOS Output Voltage Low
TTL/CMOS Output Voltage High
Propagation Delay
Instantaneous Slew Rate
Transition Region Slew Rate
Output Resistance
RS-232 Output
Short-Circuit Current
NOTE 1. Sample tested.
Test Conditions
T1_OUT, T2_OUT Loaded With
3 kΩ to Ground
T1_IN, T2_IN
T1_IN, T2_IN
T1_IN, T2_IN = 0V
V_CC = 5V
V_CC = 5V
T_A = +25°C, V_CC = 5V
I_OUT = 3.2 mA
I_OUT = – 1 mA
RS-232 to TTL or TTL to RS-232
C_L = 10 pF, R_L = 3 kΩ to 7 kΩ,
T_A = +25°C (Note 1)
R_L = 3 kΩ, C_L = 2500 pF
Measured From +3V to – 3V
or –3V to +3V
V_CC = V⁺ = V^– = 0V, V_OUT = ±2V
Min
Typ
Max
Unit
±5
±9
±10
V
—
5
10
mA
—
—
0.8
V
2
—
—
V
—
15
200
µA
– 30
—
+30
V
0.8
1.2
—
V
—
1.7
2.4
V
0.2
0.5
1
V
3
5
7
kΩ
—
—
0.4
V
3.5
—
—
V
—
0.5
—
µsec
—
—
30
V/µsec
—
3
—
V/µsec
300
—
—
Ω
—
±10
—
mA
6-4
TELCOM SEMICONDUCTOR, INC.