TCP-LVDB-12-34 Datasheet, PDF (1/2 Pages) Technology Dynamics Inc. – SWITCHING POWER SUPPLIES

APPLIED POWER CONVERSION
Division of
TECHNOLOGY DYNAMICS INC.
TCP-LVBD SERIES
400-1000 WATT SINGLE OUTPUT
SWITCHING POWER SUPPLIES
2.66” x 5.25” x 11.50”
BATTERY CHARGER
APPLICATIONS
The TCP-LVBD series 400-1000W AC-DC
power supply/battery charger provides highly
regulated output power from 400-1000 watts.
Rugged construction and superior quality
make this power supply ideal for harsh
environment applications. Available in standard,
modified or fully custom configurations, for
industrial, commercial, COTS, ruggedized and
Military applications.
STANDARD FEATURES
• Full Range Input
• Low Noise and Ripple
• Built In DC Fan For Cooling
• Current Share Function
• DC Good Signal
• Remote On/Off & Remote Sense Functions
• Rugged Construction
AVAILABLE OPTIONS
• Auto Line Selection
• 3 Phase Input
• Parallel Operation
• ORing Diode for Redundant Operation
• Rack / Panel Mount
• Ruggedized for shock & vibration
(MIL-STD-810)
• 400Hz Operation
• Conformal Coating
• LVBD (Battery Back-up)
SAFETY AND EMISSIONS
• Designed to meet UL/cUL60950-1
• Designed to meet TUV EN60950-1
• Designed to meet EN55022 (Class A)
SPECIFICATIONS
INPUT SPECIFICATIONS:
Input: 90-132/180-26V VAC Switch Select
Input Frequency: 47-63Hz
Inrush Current: 60A max at 230VAC(cold start)
Input Current: 12A max @ 115VAC 6A max @ 230VAC
Efficiency: 85 typical (depending on output model)
Hold-up time: 16ms at full load (minimum)
Leakage Current: <3.5mA maximum @ 240 VAC
OUTPUT SPECIFICATIONS
Adjustment Range: ±10% (minimum)
Minimum Load: none
Regulation: Line ±0.5% Load ±0.5% Typical
Ripple/Noise: 150mV peak to peak maximum (20 MHz)
Set Point Accuracy: ±1%(except 5V=±2%) (maximum)
Output voltage adj: ±10% minimum
Overcurrent Protection: 105-125% automatic recovery Constant Current
Overlvoltage Protection: 115-140% of V1 nominal
Overtemperature Protection: Heatsink Temp. 90°C ± 5°C Auto Recovery
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: 0°C to +50°C. Derate to 50% at +70°C
Storage Temperature: -40°C to +85°C max 95% Relative Humidity
Cooling: Internal ball bearing DC fan
Humidity: 20-90% RH non condensing
Vibration: 10-500Hz, 2G 10min/1cycle for 60 min (3 axes)(Standard Unit)
Shock: 20G Peak Acceleration (Standard Unit)
Weight: Approx: 6.6 LBS
Size: 2.66” x 5.25” x 11.50”
Design Excellence since 1976!
File: A5269