PTCP-HS-5-180 Datasheet, PDF (1/2 Pages) Technology Dynamics Inc. – HOT SWAP POWER SYSTEMS

APPLIED POWER CONVERSION
Division of
TECHNOLOGY DYNAMICS INC.
PTCP-HS SERIES
1000-3000 WATT
HOT SWAP POWER SYSTEMS
RACK MOUNT (N + 1) REDUNDANT
APPLICATIONS
The PTCP-HS Series of Hot Swap Power
Supplies provides continuous power from
1000 to 3000 watts depending on module
count. The system is 2U in height and is
loaded with standard features making the
ideal for “Critical System” use where no down
time can be tolerated. Each 1000 watt module
can be removed while the system is active should
one Module need service. Custom rack configurations
and battery back-up systems are also available,
contact Technology Dynamics Inc. for exact needs.
STANDARD FEATURES
• Power Factor Correction
• Universal AC Input
• All Outputs Tightly Regulated
• OV, OL and OT Protection Main Output
• Remote Sensing Post Isolation Diodes
• All Inputs Equipped with Isolation Diodes
for Redundancy
• LED Indicators for:
Input Power Good/Output Power Good
• Forced Current Sharing
• Floating Connectors for Hot Swap Insertion
• MTBF > 150.000 Hours
AVAILABLE OPTIONS
• Circular Connectors
• Low Voltage Battery Disconnect (LVBD)
for Battery Back-up Operation.
• Conformal Coating
• Ruggedized for Shock and Vibration
• Additional EMI Filtering
SPECIFICATIONS
ELECTRICAL
Input: 90-264VAC Single Phase; 47-63Hz
Line Regulation: ± .3%
Load Regulation: ± 2%
Ripple: 1% peak to peak, not to exceed 100mV
Efficiency: 80% typical single output units
70% typical multiple output units
Hold Up Time: 20ms (minimum)
In-rush Current: 60A (maximum) 1/2 cycle
Protection: OV, OL and OT
MECHANICAL & ENVIRONMENTAL
Operating Temperature: 0°C to +50°C (standard)
40°C to +85°C
Storage Temperature: -40°C to +85°C
Cooling: Internal DC fan
Weight: 25 lbs. (11.3 kg) for 3 module system
Size: 3.5”(H) x 19”(W) Std Rack x 17.9”(L)
88.9mm(H) x 482.6mm(W) x 457.2mm(L)
Design Excellence since 1976!
AS 9100
Certificate No: US008267-1