PTCP-5-80 Datasheet, PDF (1/2 Pages) Technology Dynamics Inc. – SWITCHING POWER SUPPLIES

APPLIED POWER CONVERSION
Division of
TECHNOLOGY DYNAMICS INC.
PTCP SERIES
400-1000 WATT SINGLE OUTPUT
SWITCHING POWER SUPPLIES
2.66” x 4.75” x 11.50”
“COTS” POWER FACTOR CORRECTED
APPLICATIONS
The PTCP series 400-1000W AC-DC power
supplies provides highly regulated output power
from 400-1000 watts.Rugged construction and
superior quality make this power supply ideal
for harsh environment applications. Available
in standard, modified or fully custom
configurations, for industrial, commercial,
COTS, Ruggedized and Military applications.
STANDARD FEATURES
• .98 Typical Power Factor
• Full Range
• Low Noise and Ripple
• Built In DC Fan For Cooling
• Current Share Function
• DC Good Signal
• Remote On/Off & Remote Sense Functions
• Rugged Construct₊ion
• High Reliability/Superior Quality
AVAILABLE OPTIONS
• Hot Swap
• Parallel Operation
• ORing Diode for Redundant Operation
• Rack / Panel Mount
• Ruggedized for shock & vibration
• 400Hz Operation
• Conformal Coating
• LVBD (Battery Back-Up)
SAFETY AND EMISSIONS
• Designed to meet UL/cUL60950-1
• Designed to meet TUV EN60950-1
• Designed to meet EN55022 (Class A)
• Designed to meet EN 55024
• Designed to meet EN61000-3-2-3
SPECIFICATIONS
INPUT SPECIFICATIONS:
Input: 100-264 VAC Single Phase
Input Frequency: 47-63Hz (400 Hz Optional)
Inrush Current: 60A max at 230VAC(cold start)
Input Current: 6.5A max @ 115VAC 3.5A max @ 230VAC
Efficiency: 85 typical (depending on output model)
Hold-up time: 16ms at full load (minimum)
Leakage Current: <3.5mA maximum @ 240 VAC
OUTPUT SPECIFICATIONS
Adjustment Range: ±10% (minimum)
Minimum Load: none
Regulation: Line ±0.5% Load ±0.5% Typical
Ripple/Noise: 150mV peak to peak maximum (20 MHz)
Set Point Accuracy: ±1%(except 5V=±2%) (maximum)
Output voltage adj: ±10% minimum
Overcurrent Protection: 105-125% automatic recovery Constant Current
Overlvoltage Protection: 115-140% of V1 nominal
Overtemperature Protection: Heatsink Temp. 90°C ± 5°C Auto Recovery
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: 0°C to +50°C. Derate to 50% at +70°C
Storage Temperature: -40°C to +85°C max 95% Relative Humidity
Cooling: Internal ball bearing DC fan
Humidity: 20-90% RH non condensing
Vibration: 10-500Hz, 2G 10min/1cycle for 60 min (3 axes)(Standard Unit)
Shock: 20G Peak Acceleration (Standard Unit)
Weight: Approx: 6.6 LBS
Size: 2.66” x 4.75” x 11.50”
Design Excellence since 1976!
File: A5269