NTDM-6HS-12-750 Datasheet, PDF (1/2 Pages) Technology Dynamics Inc. – N+1 REDUNDANT HOT SWAP POWER SYSTEMS

APPLIED POWER CONVERSION
Division of
TECHNOLOGY DYNAMICS INC.
NTDM-6HS SERIES
1500W-18,000W
N+1 REDUNDANT HOT SWAP POWER SYSTEMS
16.25” x 19” x 17.5”
APPLICATIONS
The NTDM-6HS Series of Hot Swap Rack
Power Supply systems offer (N+1) redundant
or high power paralleled outputs of 6 modules
per enclosure. This series is especially suitable
for critical telecom and wireless systems or
where bulk power is required. Modules may
be removed while system is active for ease
of replacement resulting in no down time.
STANDARD FEATURES
• MTBF > 150.000 Hours
• LED Indicators (Each Module):
Output Power Good; Input Power Good
• LCD Meters
• Tightly Regulated
• Equipped with Isolation
Diodes for Redundancy/Parallel Operation
• Circuit Breaker Input
• OV/OL/OT Protection Main Output
• Floating Connectors for Hot Swap Insertion
• Remote Sensing Post Isolation Diodes
• Sturdy Fold Down Handle
• Circular Input Connector MS-3102
AVAILABLE OPTIONS
• Power Factor Correction
• Militarized Version: MIL-STD-810
• Low Voltage Battery Disconnect
(LVBD) for Battery Back-Up Operation
• Terminal Block Covers
• 3 Phase Input
• 400 Hz Operation
• IEEE Communications Port
• Militarized Version: MIL-STD-461
SPECIFICATIONS
ELECTRICAL:
Input:
(1500W) Module 85-132 - 175-265VAC, 47-63 Hz
(2000-3000W) Module 220VAC 1Phase or 115/208 3Phase
Regulation: Line ± .3%
Load ± 2%
Ripple: 1% Peak to Peak, Not to Exceed 200mV
Efficiency: 80% Typical
Hold Up Time: 20ms Min.
In Rush Current: 60A max ½ Cycle/Module
Protections: OV,OL & OT
MECHANICAL & ENVIRONMENTAL
Operational Temperature: 0˚C to + 50˚C Standard
-40˚C to + 60˚C Optional
Storage Temperature: 0˚C to + 85˚C
Cooling: Internal DC Fan
Weight: Modules (15 lbs) Each, Rack (35 lbs)
Size: 17.5”(H) x 19” Std. Rack (W) x 16.25” (L)
Design Excellence since 1976!
AS 9100
Certificate No: US008267-1