NTDM-5-300 Datasheet, PDF (1/2 Pages) TECHNOLOGY ASSISTANCE BCNA 2010, S. L. – 1500-3000 WATT SINGLE OUTPUT SWITCHING POWER SUPPLIES

APPLIED POWER CONVERSION
Division of
TECHNOLOGY DYNAMICS INC.
NTDM SERIES
1500-3000 WATT SINGLE OUTPUT
SWITCHING POWER SUPPLIES
5” x 8” x 12.5”
POWER FACTOR CORRECTED, MILITARIZED
APPLICATIONS
The NTDM series of “BULK” Power Rugged
AC-DC power supplies provides highly
regulated output power to 3000 watts.
Rugged construction and superior quality
make this power supply ideal for harsh
environment applications. Available in
standard, modified or fully custom
configurations, for industrial, commercial,
COTS, ruggedized and Military applications.
STANDARD FEATURES
• High Efficiency Up to 90%
• Rugged Construction
• AC Input 100-132/180-264 VAC
• Built In DC Fan for Cooling
• OV, OL, OT Protection
• DC Good Signals
• Remote on/off & Remote Sense Functions
• ±10% Voltage Adjust
AVAILABLE OPTIONS
• Active PFC (Power Factor Correction)
• Parallel Operation
• 3 Phase Input
• ORing Diode for Redundant Operation
• Rack / Panel Mount
• Ruggedized for shock & vibration
• 400 Hz Operation
• Conformal Coated
SAFETY AND EMISSIONS
• Designed to meet UL/cUL60950-1
• Designed to meet TUV EN60950-1
• Designed to meet CB Report (IEC 60950-1)
• Designed to meet CE Mark (LVD)
• Designed to meet EN55022
Class B (CISPR 22 B)
SPECIFICATIONS
INPUT SPECIFICATIONS:
Input: Input Range (1500W) 90-132VAC/(2000-3000W) 180-264VDC 1Ø or 3Ø
Input Frequency: 47-63Hz (400Hz Optional)
Inrush Current: 30A at 115VAC/40A at 230 VAC (Cold Start)
Input Current: 1500W=24A, 2000W=16A, 2500W=20A, 3000W=24A
Efficiency: 83-90% Typical (Depending On Output Model)
Hold-up time: 20ms At Full Load (Minimum)
Leakage Current: <2.0mA maximum @ 240 VAC
OUTPUT SPECIFICATIONS
Adjustment Range: ±10% (Minimum)
Minimum Load: None
Regulation: Line ± 0.5% Load ± 0.5%
Ripple/Noise: 200mV Peak To Peak Maximum (20 MHz)
Set Point Accuracy: ±1%(Except 5V=±2%) (Maximum)
Output Voltage Adj: ±10% Minimum
Overcurrent Protection: 105-125% Automatic Recovery Constant Current
Overvoltage Protection: 115-140% Of V1 Nominal
Overtemperature Protection Heatsink Temp. 90°C ± 5°C Auto Recovery
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: -20°C to +50°C. Derate to 50% at +70°C
Storage Temperature: -40°C to +85°C Max
Cooling: Internal Ball Bearing DC Fan
Humidity: 20-90% RH Non Condensing
Weight: Approx: 12 Lbs
Size: 5” x 8” x 12.5”
Design Excellence since 1976!