MSP300 Datasheet, PDF (7/7 Pages) TE Connectivity Ltd – Analog Output or 14-Bit Digital Pressure with 11-Bit Temperature Output

MSP300
Pressure Transducer
ORDERING INFORMATION
M30
Model
2
Output
1
Connection
Type
-
0
-
Port
Material
0
Oxygen
Clean
0
0
0
0
Sleep Mode
(Digital Only)
Address for
I²C (Digital
Only)
5
Pressure
Port
-
100P
G
-
Pressure
Range
Pressure
Type
M30 1 = 0 – 50mV
1 = Cable 2 ft
- 0 = 17-
0 = No
0 0 = Without
0 = 0x28H 2 = 1/4-19 BSPP
- 100P 007B G = Gage
2 = 0 – 100mV 2 = Cable 4 ft
4PH SS Selection
Sleep Mode
1 = 0x36H 4 = 7/16-20 UNF-2A
200P 010B C =
3 = 0.5 – 4.5V 3 = Cable 10 ft
1 = 316L 1 = Oxygen
1 = With Sleep
2 = 0x46H Male SAE J514
300P 020B Compound
4 = 1 – 5V
M = Cable 1 m
SS
Clean B40.1
Mode
3 = 0x48H Straight Thread O-
500P 035B
5 = 4 – 20mA
N = Cable 2 m
Level IV
4 = 0x51H Ring BUNA-N 70SH-
01KP 070B
J = I²C
S = SPI
P = Cable 5 m
R = Cable 10 m
(If Analog, use
“0”)
(If Analog or
SPI, use “0”)
904, ID8.92mm x
W1.83mm
5 = 1/4-18 NPT
03KP
05KP
10KP
200B
350B
700B
6 = 1/8-27 NPT
15KP 01KB
E = 1/4-19 BSPT
F = 1/4-19 BSPP
Female
K = 1/8-27 NPT
Female
P = 7/16-20 UNF-2A
Female SAE J514
Straight Thread with
Integral Valve
Depressor
Q = M10 x 1.0 mm
S = M12 x 1.5 mm
U = G1/4 DIN 3852
Form E Gasket
DIN3869-14 NBR
W = M20 x 1.5 mm
NORTH AMERICA
Measurement Specialties, Inc.,
a TE Connectivity company
45738 Northport Loop West
Fremont, CA 94538
Tel: [phone]
Fax: [phone]
[e-mail]
EUROPE
MEAS France SAS,
a TE Connectivity company
4 Rue Gaye Marie
31027 Toulouse, France
Tel: [phone]
Fax: [phone]
[e-mail]
ASIA
Measurement Specialties (China) Ltd.,
a TE Connectivity company
No. 26 Langshan Road
Shenzhen High-Tech Park (North) Nanshan District,
Shenzhen, 518057
China
Tel: [phone]
Fax: [phone]
[e-mail]
TE.com/sensorsolutions
Measurement Specialties, Inc., a TE Connectivity company.
Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein
might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes o nly, is believed to be reliable. However, TE Connectivity makes
no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard
Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse
of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.
© 2015 TE Connectivity Ltd. family of companies All Rights Reserved.
SENSOR SOLUTIONS ///MSP300
11/2016
Page 7