408-1502 Datasheet, PDF (4/6 Pages) TE Connectivity Ltd – Hand Crimping Tools

GO Diameter
NO-GO Diameter
408-1502
GO Diameter NO-GO Diameter
Tool
45160
45575-1
Suggested Plug Gage Design for
Wire Barrel Section
Gage Element Diameter
GO
NO-GO
2.769-2.776
[.1090--.1093]
3.023--3.030
[.1190--.1193]
2.918--2.921
[.1149--.1150]
3.172--3.175
[.1249--.1250]
Tool
45160
45575-1
Figure 5
Suggested Plug Gage Design for
Insulation Barrel Section
Gage Element Diameter
GO
NO-GO
“W” Width
(Max)
0.762-0.770
[.0300-.0303]
1.267-1.270
[.0499-.0500]
1.91 [.075]
1.016-1.024
[.0400-.0403]
1.521-1.524
[.0599-.0600]
3.18 [.125]
Detail A
Inspection of Crimping Chamber
Detail B
Wire Barrel
Plug Gage
Wire Barrel
Section
Insulation Barrel
Section
Insulation
Barrel Gage
GO element must
pass completely
through the crimping
chamber.
NO-GO element may enter
partially, but must NOT
pass completely through
the crimping chamber.
GO element must
pass completely
through the crimping
chamber.
Rev J
Figure 6
NO-GO element may enter
partially, but must NOT
pass completely through
the crimping chamber.
4 of 6