MHR Datasheet, PDF (3/5 Pages) MTRONPTI – 9x14 mm, 5.0 Volt, HCMOS/TTL, Clock Oscillator

MHR SERIES
Miniature General Purpose AC LVDT
Operating temperature
Shock survival
Vibration tolerance
Housing material
Electrical connection
IEC 60529 rating
ENVIRONMENTAL SPECIFICATIONS & MATERIALS
-65°F to +300°F [-55°C to 150°C]
1,000 g (11ms half-sine)
20 g up to 2KHz
AISI 400 Series stainless steel
Six lead-wires, 32 AWG stranded Copper, PTFE insulated, 1 foot [0.3m] long (longer wires optional)
IP61
Notes:
All values are nominal unless otherwise noted
Electrical specifications are for the test frequency indicated in the table
Dimensions are in inch [mm] unless otherwise noted
FR: Full Range is the stroke range, end to end; FR=2xS for ±S stroke range
FRO (Full Range Output): Algebraic difference in outputs measured at the ends of the range
MECHANICAL SPECIFICATIONS
Parameter
Body length “A”
Core length “B”
Body weight oz
[g]
Core weight oz
[g]
MHR 005
0.375
[9.5]
0.180
[4.6]
0.07
[2]
0.004
[0.1]
MHR 010
0.535
[13.6]
0.233
[5.9]
0.11
[3]
0.007
[0.2]
MHR 025
0.660
[16.8]
0.400
[10.2]
0.18
[5]
0.016
[0.5]
MHR 050
0.815
[20.7]
0.500
[12.7]
0.21
[6]
0.016
[0.5]
MHR 100
0.990
[25.1]
0.625
[15.9]
0.21
[6]
0.025
[0.7]
MHR 250
1.850
[47.0]
1.125
[28.6]
0.32
[9]
0.032
[0.9]
MHR 500
3.300
[83.82]
2.000
[50.8]
0.60
[17]
0.056
[1.6]
MHR 1000
5.600
[142.2]
3.000
[76.2]
0.92
[26]
0.088
[2.5]
MHR 2000
8.000
[203.2]
3.00
[76.2]
1.4
[40]
0.088
[2.5]
Dimensions are in inch [mm]
SENSOR SOLUTIONS /// MHR Series Rev. 8
5/2016
Page 3