408-9916 Datasheet, PDF (3/3 Pages) TE Connectivity Ltd – Read these instructions and understand them before using the seating tool.

Note: Not to Scale
38.1 mm [1.50 in.]
50.8 mm [2.0 in.]
408-9916
12.7 mm [.50 in.]
12.7 mm [.50 in.]
Figure 3
5.3. Periodic Inspection
Regular inspections should be performed by quality
control personnel. A record of scheduled inspections
should remain with the seating tool or be supplied to
personnel responsible for the seating tool. The
inspection frequency should be based on the amount
of use, working conditions, operator training and skill,
and established company standards.
6. REPLACEMENT AND REPAIR
The parts shown in Figure 1 are customer-replaceable.
A complete inventory can be stocked and controlled to
prevent lost time when replacement of parts is
necessary. Order replacement parts through your
Representative, or call 1-800-526-5142, or send a
facsimile of your purchase order to 
1-717-986-7605, or write to:
:
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
7. REVISION SUMMARY
Revisions to this instruction sheet include:
• Changed company name and logo
• Modified Paragraph 3.1
• Changed tooling in Paragraph 3.2
Rev B
3 of 3