408-7714 Datasheet, PDF (3/3 Pages) TE Connectivity Ltd – Universal MATE-N-LOK Connectors

Cap Housing
Mating
Face
Panel Mount
Latch (2 Places)
408-7714
Panel Mounting
Twist and Lock Cap Housing
Panel Cutout Short Side
Polarization Feature
Pin 1
Indicator Rib
0.25 mm [.010 in.]
Max Gap
Panel Cutout
Direction
Note: Wires Not Shown
Figure 3
Cap Housing
Rotated
1.6. Mating
Ensure that the mating connectors have identical number of circuits and a pin contact mating with a socket
contact. Align the mating faces of the connectors, and push them together until the locking latch fully engages
the locking tab. See Figure 4.
Note: Free-Hanging Shown
Locking Latch Fully Engaged
with Locking Tab
Plug Housing (Ref)
Cap Housing with
Enclosed Strain Relief (Shown)
Figure 4
2. CONTACT EXTRACTION
Individual contacts can be removed from the plug or cap housing using extraction tool 318851-1 according to
408-4371 packaged with the tool.
3. REPLACEMENT AND REPAIR
Do not use defective or damaged product. These products cannot be repaired. For replacement information,
call the number at the bottom of page 1.
4. REVISION SUMMARY
Revisions to this instruction sheet include:
 Updated document to corporate requirements
 Changed TwistLok to twist and lock, replaced tables in Figures 1, 2, 3, 4, and 5 with reference part
numbers in Figure 1, added housings to Figure 1, and added Figures 2, 3, and 4, and Section 3
Rev G
3 of 3