408-4546 Datasheet, PDF (3/3 Pages) TE Connectivity Ltd – Read these instructions and understand them before using the seating tool.

408-4546
5.2. Daily Maintenance
It is recommended that each operator be made aware
of, and responsible for, the following steps of daily
maintenance:
1. Remove dust, moisture, and other contaminants
with a clean, soft brush, or lint-free cloth. Do NOT
use objects that could damage the tool or any of its
components.
2. Ensure that pins and screws are in place and
secured.
3. When the seating tool is not in use, store it in a
clean, dry area.
5.3. Periodic Inspection
Regular inspections should be performed by quality
control personnel. A record of scheduled inspections
should remain with the seating tool or be supplied to
supervisory personnel responsible for the seating tool.
The inspection frequency should be based on the
amount of use, working conditions, operator training
and skill, and established company standards.
6. REPLACEMENT AND REPAIR
The parts listed in Figure 3 are customer-replaceable.
A complete inventory can be stocked and controlled to
prevent lost time when replacement of parts is
necessary. Order replacement parts through your
Representative, or call 1-800-526-5142, or send a
facsimile of your purchase order to 1-717-986-7605 or
write to:
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
For customer repair service, call 1-800-526-5136.
7. REVISION SUMMARY
Revisions to this instruction sheet include:
• Changed company name and logo
• Changed Paragraph 3.1
• Replaced reference to application specification
• Added gap for mid-plane application to Figure 2
50.8 [2.00]
38.1 [1.50]
1
3
2
5
12.45 [.490] (Seating Tools -1)
24.92 [.981] (Seating Tools -2)
6
Note: Seating Tool 91313-2 shown
PART NUMBER FOR SEATING TOOL
ITEM
10 Rows
6 Rows
DESCRIPTION
91312-1
91312-2
91313-1
91313-2
1
1320190-1
1320190-1
Adapter
2
2-21012-8
2-21012-8
Socket Set Screw, 6-32×.19 in.
3
1-21028-0
21028-6
Slotted Spring Pin
4
1320192-1 1320192-2 1320193-1 1320193-2 Signal Pin Bar
5
1320194-1 1320194-2 1320194-1 1320194-2 Ground Pin Drive Bar
1320195-1
—
1320196-1 1320196-2 Side Plate
6
—
1320195-2
—
—
Side Plate
7
—
1583844-1
—
1583646-1 Side Plate, Keyed
Figure 3
4
7
12.01 [.473]
QTY PER SEATING TOOL
91312-[ ] 91313-[ ]
1
2 (-1) 4 (-2)
1
1
4
2
1
1
1
2 (-1) 4 (-2)
1
1
2
2
—
1
Rev B
3 of 3