408-32200 Datasheet, PDF (3/3 Pages) TE Connectivity Ltd – CFP2 and CFP4 Cage Assembly Seating Tool

408-32200
NOTE
For detailed application requirements for the cage assembly, refer to the application specification 114-32146.
3. MAINTENANCE AND INSPECTION
1. Inspect the seating tool assembly immediately upon arrival to ensure that it has not been damaged
during shipment and that it conforms to the dimensions given in Figure 3.
2. Remove dust, moisture, and contaminants with a clean, soft brush or a lint-free cloth. Do not use
objects that could damage the components.
3. When the seating tool assembly is not in use, store it in a clean, dry area.
4. Periodically inspect the seating tool assembly for damage.
Seating Tool
Seating Tool Kit 14 Shown
Wall Support
A
D
F
E
B
C
SEATING TOOL CAGE ASSEMBLY
ASSEMBLY CONFIGURATION
2215079-1
2215079-2
2215081-1
2215081-4
CFP2 11
CFP2 12
CFP4 11
CFP4 14
A
86.2 [3.39]
71.5 [2.82]
B
46.55 [1.83]
89.15 [3.51]
26.05 [1.03]
92.65 [3.65]
Figure 3
DIMENSION (mm [in.])
C
D
28.0 [1.10]
41.45 [1.63]
84.05 [3.31]
25.05 [.98]
021.15 [.83]
87.75 [3.45]
E
12.15 [.48]
09.25 [.36]
F
95.0 [3.74]
80.7 [3.18]
4. REVISION SUMMARY
Initial release of instruction sheet
Rev A
3 of 3