154BC Datasheet, PDF (3/5 Pages) TE Connectivity Ltd – 316L Stainless Steel or Titanium

154BC
PERFORMANCE SPECIFICATIONS
Supply Current: 1.5 mA
Ambient Temperature: 25°C (unless otherwise specified)
PARAMETERS
MIN
TYP
MAX
UNITS
NOTES
Span
75
100
150
mV
1
Zero Pressure Output
-1.0
0
1.0
mV
2
Pressure Non Linearity
-0.30
0.30
%Span
3
Pressure Hysteresis
-0.20
0.20
%Span
Repeatability
±0.02
%Span
Input Resistance
2.0
3.5
5.8
kΩ
3
Output Resistance
3.0
Temperature Error – Span
-1.0
6.0
kΩ
1.0
%Span
4
Temperature Error – Offset
-1.0
1.0
%Span
4
Thermal Hysteresis – Span
-0.25
±0.05
0.25
%Span
4
Thermal Hysteresis – Offset
-0.25
±0.05
0.25
%Span
4
Long Term Stability – Span
±0.10
%Span/Year
Long Term Stability – Offset
Supply Current
±0.25
%Span/Year
0.5
1.5
2.0
mA
5
Output Load Resistance
5
MΩ
6
Insulation Resistance (50Vdc)
50
MΩ
7
Output Noise (10Hz to 1kHz)
1.0
uV p-p
Response Time (10% to 90%)
0.1
ms
Overload Pressure
2X
Rated
8
Burst Pressure
3X
Rated
9
Compensated Temperature
-20
+85
°C
Operating Temperature
-40
+125
ºC
10
Storage Temperature
-50
+125
ºC
10
Media – Pressure Port
Liquids and Gases compatible with 316L Stainless Steel or ASTM Grade 2 CP Titanium
Notes
1. For amplified output circuits, 3.012V ±1% interchangeability with gain set resistor. See application schematic.
2. Measured at vacuum for absolute (A), ambient for gage (G).
3. Best fit straight line.
4. Over the compensated temperature range with respect to 25°C.
5. Guarantees output/input ratiometricity.
6. Load resistance to reduce measurement errors due to output loading.
7. Between case and sensing element.
8. 2X or 500psi, whichever is less. The maximum pressure that can be applied without changing the transducer’s performance or accuracy.
9. 3X or 600psi, whichever is less. The maximum pressure that can be applied to a transducer without rupture of either the sensing element
or transducer.
10. Maximum temperature range for product with standard cable and connector is -20°C to +105°C.
SENSOR SOLUTIONS ///154BC
9/201
Page 3