MS5535C Datasheet, PDF (22/22 Pages) Intersema Sensoric SA – PRESSURE SENSOR MODULE

MS5535C
14 bar Pressure Sensor Module
CLEANING
The MS5535C has been manufactured under cleanroom conditions. Each device has been inspected for the
homogeneity and the cleanness of the silicone gel. It is therefore recommended to assemble the sensor under class
10’000 or better conditions. Should this not be possible, it is recommended to protect the sensor opening during
assembly from entering particles and dust. To avoid cleaning of the PCB, solder paste of type “no-clean” shall be
used. Cleaning might damage the sensor!
ESD PRECAUTIONS
The electrical contact pads are protected against ESD up to 4 kV HBM (human body model). It is therefore essential
to ground machines and personal properly during assembly and handling of the device. The MS5535C is shipped
in antistatic transport boxes. Any test adapters or production transport boxes used during the assembly of the sensor
shall be of an equivalent antistatic material.
ORDERING INFORMATION
Product Code
MS5535-CM
Product
14 bar Pressure
Sensor Module with
gel
Art. No
325535009
Package
SMD hybrid with solder paste,
metal protection cap,
silicone gel sensor protection
Comments
Standard version
NORTH AMERICA
Measurement Specialties, Inc.,
a TE Connectivity Company
45738 Northport Loop West
Fremont, CA 94538
Tel: [phone]
Fax: [phone]
e-mail: [e-mail]
Website: www.meas-spec.com
EUROPE
Measurement Specialties (Europe), Ltd.,
a TE Connectivity Company
Switzerland Sàrl
Ch. Chapons-des-Prés 11
CH-2022 Bevaix
Tel: [phone]
Fax: + 41 32 847 9569
e-mail: [e-mail]
Website: www.meas-spec.com
ASIA
Measurement Specialties (China), Ltd.,
a TE Connectivity Company
No. 26 Langshan Road
Shenzhen High-Tech Park (North) Nanshan
District, Shenzhen, 518057
China
Tel: [phone]
Fax: [phone]
e-mail: [e-mail]
Website: www.meas-spec.com
TE.com/sensorsolutions
Measurement Specialties, Inc., a TE Connectivity company.
Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein
might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes
no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard
Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse
of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.
© 2015 TE Connectivity Ltd. family of companies All Rights Reserved.
DA5535C_007
0005535C1195 ECN1511
SENSOR SOLUTIONS ///MS5535C
09/2015
Page 22