ZHD-SCE Datasheet, PDF (2/4 Pages) TE Connectivity Ltd – HEAT SHRINK IDENTIFICATION SYSTEM

ZHD-SCE, LOW FIRE HAZARD, DIESEL RESISTANT
Features
 Zero Halogen
 Low Toxic Fumes
 Non-flame propagating
 Resistant to key rail and industrial fluids including
diesel (defined by RW-2536)
 Sleeve diameters from 2.4mm to 38.1mm
 Shrink ratio 2:1
Temperature Rating
 Operating Temperature Range -55°C to 125°C
(-67°F to 257°F)
Applications
Design For Environment
 Pre-termination Cable Identification
 Suitable for locations where there is a fire risk to
people or equipment
 Suitable for installations that require outstanding fluid
resistance, especially from diesel, from a zero
halogen identification sleeve
 Rail, Mass transit, Aerospace, Marine and Heavy
Industrial
 No Halogens, Sulphur, Nitrogen, Phosphorus and
Cadmium sources above trace level. The flame
retardant used in this product does not contain
melamine cyanurate
 Further information and a downloadable declaration
covering RoHS and REACH compliance can be found
at the ‘TE Product Compliance Support Centre’:
http://www.te.com/usa-en/utilities/product-
compliance.html
Specifications / Approvals
TE Connectivity Standard RW-2536
Rail Standards
EN45545-2, Hazard Classifications 1 and 2, In accordance with
requirement set R22/R23
BS 6853 Code of practice for fire precautions in the design and construction of
passenger carrying trains.
Interior minor use of materials of mass 100g to 500g vehicle category II
EN 50343 Rolling stock applications - Rolling stock - Rules for installation of cabling
- Appendix H
Where possible, TE has tested product as a finished item, including the print. Operational tests are followed by an
assessment of mark adherence to validate fit form and function. Further details can be found in TE standard RW-2536.
RAIL /// TTDS-263 ZHD-SCE HEAT SHRINK IDENTIFICATION MARKER SLEEVES
PAGE 2