C-1926734 Datasheet, PDF (2/5 Pages) TE Connectivity Ltd – THIS DRAWING IS A CONTROLLED DOCUMENT.

8
7
6
5
4
3
2
1
THIS DRAWING IS UNPUBLISHED.
C ^{COPYRIGHT 20}
BY -
RELEASED FOR PUBLICATION
20
ALL RIGHTS RESERVED.
LOC
DIST
GP 00
P
LTR
-
SEE SHEET 1
REVISIONS
DESCRIPTION
DATE
-
DWN
APVD
--
D
KEEP OUT REGION,
RECOMMENDED
1 _{HOUSING: GLASS FILLED LIQUID CRYSTAL POLYMER, COLOR: BLACK,}
UL 94V-O RATED.
SIGNAL CONTACT: PHOSPHOR BRONZE.
D
SIGNAL OVERMOLD: GLASS FILLED POLYESTER.
A
POWER CONTACT: COPPER ALLOY.
BOARDLOCK: PHOSPHOR BRONZE.
B
C
SPACES @
2.00
D SPAZCES @
2.75
2X 5.11
2X
11
2.50 0.05
2 _{SIGNAL CONTACT: 0.00127mm MIN NICKEL ALL OVER,}
MATING AREA: 0.00076mm MIN GOLD OR 0.00008mm MIN GOLD OVER
0.00076mm MIN PALLADIUM-NICKEL
TAIL AREA: 0.0005mm MIN MATTE TIN.
POWER CONTACT: 0.00127mm MIN NICKEL ALL OVER,
MATING AREA: 0.00076mm MIN GOLD OR
0.00008mm MIN GOLD OVER 0.00076mm MIN PALLADIUM-NICKEL,
TAIL AREA: 0.0005mm MIN MATTE TIN.
BOARDLOCK: 0.00076mm MIN MATTE TIN OVER
0.00127mm MIN NICKEL.
3 CONTACT MATING AREA LUBRICATED WITH BELLCORE APPROVED LUBRICANT,
TECHNICAL REFERENCE: GR-1217-CORE, ISSUE 1, NOVEMBER 1995.
C
4X 2.00
-X- ₆
10.95
4 CONNECTOR ASSEMBLY MARKED WITH PART NUMBER AND DATE CODE.
C
5X 1.50
5 _{CUSTOMER TO SPECIFY LOAD PATTERN, USE WORKSHEET ON SHEET 3,}
FOR EXISTING PART NUMBERS ALREADY LOADED SEE SHEET 4.
LOAD PATTERNS SHOWN ON SHEETS 1
& 3 ILLUSTRATES CHOICES,
DOES NOT MATCH ANY DASH PART NUMBERS.
4.425
6 _{DATUMS AND BASIC DIMENSIONS TO BE ESTABLISHED BY CUSTOMER.}
1.50
6
6
BASIC
EX
8
( 0.60 or 0.90)
4.375
POW.
POSN.
"1"
18.00 # 0.13 10
7 _{PC BOARD THICKNESS 1.4mm MIN.}
FOR WAVE SOLDER PC BOARD THICKNESS 2.62mm MAX.
-Y-
SIG.
POSN.
"A1"
FX
8
( 0.60 or 0.90)
8 _{FOR WAVE SOLDER: FINISHED HOLE DIAMETER: 0.90+/-0.05mm}
FOR PRESS FIT: DRILL HOLE DIAMETER: 0.70 +/-0.02mm
FINISHED HOLE DIAMETER: 0.61mm REF
PAD DIAMETER: 0.90 +/-0.05mm
Cu PLATING THICKNESS: 0.025-0.050mm
WITH A SURFACE FINISH AND THICKNESS OF EITHER:
HASL SnPb: 0.004-0.015mm
IMMERSION Sn: 0.0005mm MIN.
B
RECOMMENDED PRINTED CIRCUIT BOARD LAYOUT
7
OSP: 0.0002-0.0005mm
IMMERSION Ag: 0.0001mm MIN.
B
IMMERSION Au/Ni: 0.0001-0.0005mm Au, 0.004-0.0076mm Ni
(AS VIEWED FROM COMPONENT SIDE)
9 SEE CUSTOMER DRAWING 1926733 FOR MATING RECEPTACLE CONNECTOR.
10 _{DIMENSION IS TO FIRST ROW OF PLATED THRU HOLES ON RECEPTACLE PCB.}
11 _{UNPLATED HOLES}
12. THIS CONNECTOR EMPLOYS UL RECOGNIZED Z-PACK 2mm HM CONNECTOR
AT SIGNALS
A
4805 (3/11)
A
THIS DRAWING IS A CONTROLLED DOCUMENT.
DIMENSIONS:
mm
MATERIAL
-
-
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
0 PLC
1 PLC
2 PLC
3 PLC
4 PLC
ANGLES
FINISH
-
.2
.25
-
-
2
-
-
DWN
G.PETERS
CHK
N.REESER
APVD
N.REESER
PRODUCT SPEC
03JUN2008
06JUN2008
06JUN2008
-
APPLICATION SPEC
-
WEIGHT
-
Customer Drawing
TE Connectivity
NAME
ASSEMBLY, RIGHT ANGLE, PLUG,
SIGNAL/POWER, PASSIVE GUIDE,
-
SIZE
CAGE CODE
DRAWING NO
RESTRICTED TO
A1 ⁰⁰⁷⁷⁹
1926734
SCALE
SHEET
1:1
OF
25
-
REV
F8