82A0111 Datasheet, PDF (2/2 Pages) TE Connectivity Ltd – This specification sheet forms a part of the latest issue of Raychem Specification 80.

Revision SCD Number
SPECIFICATION CONTROL DRAWING ^{Page 2 of 2 T}
82A0111
PART NUMBER
1/
82A0111-28-*
82A0111-26-*
82A0111-24-*
82A0111-22-*
82A0111-20-*
82A0111-18-*
82A0111-16-*
82A0111-14-*
82A0111-12-*
82A0111-10-*
82A0111-8-*
82A0111-6-*
82A0111-4-*
82A0111-2-*
82A0111-1-*
82A0111-0-*
82A0111-00-*
TABLE II. PERFORMANCE DETAILS
BEND TESTING
MANDREL DIAMETER
(inch) (± 3%)
WEIGHT
(lb) (± 3%)
CROSSLINKING PROOF TEST
CROSSLINKING PROOF TEST
.250
.125
.375
.125
.375
.250
.500
.375
.500
.500
.500
.500
.750
.750
1.00
1.00
1.50
1.50
2.00
1.50
3.00
2.00
3.00
2.00
4.00
2.50
6.00
3.00
8.00
4.00
8.00
4.00
8.00
4.00
WIRE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 150°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
COLOR: White preferred
CONCENTRICITY: 70% (minimum)
CROSSLINKING PROOF TEST: 300 ± 3°C for 7 hours
IDENTIFICATION AND COLOR STRIPING DURABILITY:
125 cycles (250 strokes) (minimum), 500 gram weight
INSULATION ELONGATION AND TENSILE STRENGTH:
AWG 28-26: Elongation, 75% (minimum)
Tensile Strength, 3000 lbf/in² (minimum)
AWG 24-10: Elongation, 75% (minimum)
Tensile Strength, 3500 lbf/in² (minimum)
AWG 8-00: Elongation, 125% (minimum)
Tensile Strength, 3000 lbf/in² (minimum)
INSULATION FLAWS:
Spark Test, 1.5 kV (rms) at 3 kHz
Impulse Dielectric Test, 6.0 kV (peak)
INSULATION THICKNESS:
AWG 28-16: .004 in. (minimum)
AWG 14-10: .006 in. (minimum)
AWG 8-00: .012 in. (minimum)
SECANT MODULUS: (Test per ASTM D 882)
AWG 28-10: 5.0 x 10⁴ lbf/in² (maximum)
AWG 8-00: 4.0 x 10⁴ lbf/in² (maximum)
2% strain, 2 inch jaw separation, 0.2 inch/minute
SHRINKAGE: 150 ± 3°C for 6 hours,
AWG 28-10: 0.13 in. (maximum) in 12 inches
AWG 8-00: 0.25 in. (maximum) in 12 inches
VOLTAGE WITHSTAND (Post Environmental): 2500 volts (rms), 60 Hz
PART NUMBER:
The “*” in the part numbers in Tables I and II shall be replaced by a
color code designator.
1/ Example: AWG 12, white; 82A0111-12-9
AWG 12, white with a black stripe; 82A0111-12-90
1/ See footer section on page 1