5EFLA2S Datasheet, PDF (2/3 Pages) Tyco Electronics – Multi-Function Power Modules with RFI Power Line Filters

Corcom Product Guide
Catalog: 1654001
Issue Date: 06.2011
Power Entry Module with Enhanced EMI Filtering (continued)
LA Series
Voltage Selection
To change selected voltage: remove the fuse
cartridge using a small blade screwdriver or similar
tool; select the desired voltage by matching the
arrow on the fuse cartridge to the arrow located on
the front of the unit (lower right corner); replace the
fuse cartridge making sure the voltage selection
arrow aligns with the arrow located on the front of
the unit.
Case Styles
A
B
C
F
D
BC
A
DE ^F
Changing Fuses
Remove the fuse cartridge using a small blade screw-
driver or similar tool; for Metric fusing pull out the
sliding fuse covers located at the top of each fuse
compartment; insert desired fuses; push the sliding
fuse covers back in place and insert the fuse
cartridge back into the unit making sure the voltage
selection arrow aligns with the arrow located on the
front of the unit. (Note: Single North American or
Metric fuse placement is always on the side of the
desired voltage selection arrow behind the fuse
symbol; the other compartment may be used as a
spare or be left blank. Dual Metric fusing capability is
available for 220/240 volts only.)
Electrical Schematics
FLA Model
Power on/off
Neutral
Ground
Phase
XLA & ZLA Model
On/Off
Neutral
Hot
120V
120V
240V A or D
A
A
120V
B
B
C
D
D
E
E
120V
F
F
G
Customer
Transformer
Primaries
240V A or D
A
A
120V
B
B
C
D
D
E
E
120V
F
F
G
Customer
Transformer
Primaries





E




Case Dimensions
Part No.
5EFLA2S
3EXLA2S
3EZLA2S
ABCDE F







     
     
 ^{}    
     
     
     
Recommended Panel Cutout
.093_R
2.36
.140 _Dia.
3.56
2.42*
61.47
1.19*
30.23
1.57
39.88
* ^{+.020 - .00}
+ 0.5 - .00
3
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
181
For email, phone or live chat, please go to
te.com/help
corcom.com