55PC0213 Datasheet, PDF (2/2 Pages) TE Connectivity Ltd – This specification sheet forms a part of the latest issue of Raychem Specification 55PC.

SPECIFICATION CONTROL DRAWING
Revision SCD
Page 2 of 2
F
55PC0213
WIRE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 200°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
COLOR: White preferred
CROSSLINK VERIFICATION: 300 ± 3°C for 1 hour
IDENTIFICATION AND COLOR STRIPING DURABILITY:
125 cycles (250 strokes) (minimum). 500 g weight.
INSULATIONELONGATIONANDTENSILESTRENGTH:
Total Insulation,
Elongation, 50% (minimum)
Tensile Strength, 5000 lbf/in² (minimum)
INSULATION FLAWS:
Spark Test, 3.0 kV (rms)
Impulse Dielectric Test, 8.0 kV (peak)
INSULATION THICKNESS: .008 in. (nominal) total insulation
SHRINKAGE: 230 ± 3°C for 1 hour, 0.125 inch (maximum) in 12 inches.
VOLTAGE WITHSTAND TEST (Post Environmental): 2500 volts (rms)
PART NUMBER:
The “*” in the part numbers on page 1 shall be replaced by a color code designator,
1/ Example: AWG 22, white: 55PC0213-22-9
AWG 22, white with black stripe: 55PC0213-22-90
1/ See footer section on page 1